Specifications

led wall screen
1)competitive price
2)unique design structure
3)rich engineering experience
4)CE and ROHS certification

LAMP led screen features: 

1, High brightness and be adjustable. Built-in functional card support brightness automatically adjustment.

 

2, a turn-key solution including professional sports software and hardware.

 

3, rich advertising  LED display engineering experience both in domestic and oversea market.

 

4, Unbeatable product stability through strict Quality Control System.

 

Products specification:

Pixel Pitch:	10 mm	12 mm	12.5 mm	16 mm	20 mm
Pixel Density:	10000 pixels/sqm	6944 pixels/sqm	6400 pixels/sqm	3906 pixels/sqm	2500 pixels/sqm
Pixel Configuration:	1R1G1B	1R1G1B	2R1G1B	1R1G1B	1R1G1B
Module Dimension:	160*160 mm	192*192 mm	200*200 mm	256*128 mm	320*160 mm
Module Resolution:	16*16 pixels	16*16 pixels	16*16 pixels	16*8 pixels	16*8 pixels
Cabinets Dimension:	640*640 mm	768*768 mm	800*800 mm	1024*768 mm	1280*960 mm
Cabinets Resolution:	64*64 pixels	64*64 pixels	64*64 pixels	64*48 pixels	64*48 pixels
Brightness:	6800 cd/sqm	6800 cd/sqm	6400 cd/sqm	7500 cd/sqm	6000 cd/sqm
Best Viewing Distance:	> 10m	> 12m	> 12m	> 16m	> 20m
Average Consumption:	400 W/sqm	350 W/sqm	430 W/sqm	450 W/sqm	320W/sqm
Max Consumption:	800 W/sqm	780 W/sqm	900 W/sqm	900 W/sqm	800 W/sqm
Viewing Angle:	Horizontal angle: 120 degree ;Vertical angle: 60 degree
Processing:	12 bit
Ingress Protection:	Front IP65; Rear IP54
Refresh Rate:	300 to   4800Hz
LED lifetime:	100,000 hours
Input Voltage:	90 to 260VAC, 50/60Hz
Operation Humidity:	10% to 99%

All product specifications are for reference only and subject to change without prior notice; Please contact sales for details.

At the same time, we can design according to customer requirements and production.

system diagram:

 

 

LED display installation steps:

1.   Assemble the cabinets on the structure.

2.   Connect the UTP cables between cabinets.

3.   Connect the AC cables between cabinets.

4.   Install Sending Card.

5.   Connect the DVI cable between Sending Card and Graphic   Card.

6.   Connect the COM cable between Sending card and   computer.

7.   Connect the UTP cables between Sending Card and Receiving Card.

8.   Turn on control computer.

9.    Install LED studio software (see attached CD and serial number is 888888)

10.   Turn on LED display.

11.   Set the display mode in “clone mode” in the window of Graphic Card properties.

12.   Use the LED studio to control the display.