Magnesium plate AZ31B,AZ31D,AZ61A,AZ80
USD $30 - $1,000 /Kilogram
Min.Order:10 Kilograms
Dongguan Shuobao Industrial Equipment Co., Ltd.
MAGNESIUM PLATE
SIZE RANGE:
Sheet: thickness from 1mm to 6mm; Max. width is 600mm; Max. length is 6000mm;
Plate: thickness from 6 mm to 200mm; Max. width is 2500mm; Max. length is 6000mm;
Block: We can supply cut-to-size blocks according to customer's requirements.
Coil: thickness from 0.5 to 2.7mm, max. width 240mm;
3) Packing: Per piece of magnesium plate wrapped with plastic in wooden cases
4) Advantages and usages:
Sheet and plate in AZ31B find application in medium strength service at temperatures below 150°C. Diverse uses including aerospace, aircraft, concrete tools, 3C ect.
5) SURFACE TREATMENT
All the normal chromating , anodizing, plating, and finishing treatment are readily applicable. AZ31B also responds well to plasma
6) HEAT TREATMENT
No thermal treatment is available for increasing the strength of this alloy after fabrication.
7) MECHANICAL PROPERTIES
Alloy and Temper | Thickness (mm) | Yield Strength 0.2% offset (MPa) | Tensile strength (MPa) | Elongation In 5.65 √A (%) |
AZ31B-O | 0.5 – 1.5 | 125 | 221 | 10 |
1.5 – 6.3 | 105 | 221 | 9 | |
6.3 - 75 | 105 | 221 | 8 | |
AZ31B-H24 | 0.5 – 6.3 | 200 | 269 | 5 |
6.3 -9.5 | 179 | 262 | 7 | |
9.5 – 12.7 | 165 | 255 | 8 | |
12.7 - 25 | 152 | 248 | 8 | |
25- 50 | 138 | 234 | 6 | |
50 - 80 | 124 | 234 | 7 | |
AZ31B-H26 | 6.3 - 10 | 186 | 269 | 6 |
10 – 12.5 | 179 | 262 | 6 | |
12.5 - 20 | 172 | 255 | 5 | |
20 – 25 | 159 | 255 | 5 | |
25 - 40 | 152 | 241 | 5 | |
40 - 50 | 148 | 241 | 5 |
ASTM B 93/B 93M-00 | AZ31B | AZ31D | AZ61A | AZ80A | MgMn |
Al % | 2.50-3.50 | 2.50-3.50 | 5.80-7.20 | 7.80-9.20 | 0.01max |
Mn % | 0.20-1.00 | 0.20-1.00 | 0.15-0.50 | 0.12-0.50 | 0.50-1.30 |
Zn% | 0.60-1.40 | 0.60-1.40 | 0.40-1.50 | 0.20-0.80 | — |
Fe % | 0.003max | 0.002max | 0.005max | 0.005max | 0.01max |
Cu % | 0.01max | 0.01max | 0.05max | 0.05max | 0.01max |
Si % | 0.08max | 0.05max | 0.10max | 0.10max | 0.05max |
Ni% | 0.001max | 0.001max | 0.005max | 0.005max | 0.001max |
Others each % | 0.05max | 0.01max | — | — | 0.05max |
Others total % | 0.30max | ----- | 0.30max | 0.30max | 0.30max |
Mg % | BALANCE | BALANCE | BALANCE | BALANCE | BALANCE |
PS: by control trace elements,we can offer any special request releated magensium plates,such as pure plate,AZ21,ZK80ect.. |