Glazed roof tile roll forming line machine
Metal Roof roll forming machine Main Parts
* Manual Decioler
* Roll Forming System
* Hydraulic Cutting
* Hydraulic Station
* PLC Control System
* Run-out Table
Metal Roof roll forming machine Working Flowing
Decoiler--- Feeding---- Roll Forming ---- Cutting ---- Run out table
Metal Roof roll forming machine Parameters :
No. | Spc. | |
1 | suitable material | Color Steel plate, galvanized sheet |
2 | Feeding width | 1000mm//1200mm/1250mm or customized |
3 | Rows of rollers | 16rows |
4 | Main power | 4kw |
5 | Hydraulic power | 4kw |
6 | Thickness of raw material | 0.3-1.0mm |
7 | Transportation system | Chain transportation |
8 | Thickness of chain | 1.2 inches |
9 | Effective Width | 800-1100mm or customized |
10 | Out diameter of shaft | 80mm (solid shaft) |
11 | Material of shaft | 45# steel forged by the Carbon at high temperature |
12 | Roller material | 40Cr steel polished and coated with chrome HRC55-60° |
13 | Shear mould | Cr12 |
14 | Voltage | 380V 50Hz/60Hz 3phases |
15 | Control system | PLC Frequency Control System with touch screen |
16 | Toal Weight | 7 tons |
Metal Roof roll forming machine types
Type | Input width | Output width | Thickness of board |
LS-1250-1100-19 | 1250mm | 1100mm | 0.4-0.8mm |
LS-1200-1000-34 | 1200mm | 1000mm | 0.4-0.8mm |
LS-1000-860-35 | 1000mm | 860mm | 0.4-0.8mm |
LS-1000-840-24 | 1000mm | 840mm | 0.4-0.8mm |
LS-1000-828-28 | 1000mm | 828mm | 0.4-0.8mm |
LS-1000-828-25 | 1000mm | 828mm | 0.4-0.8mm |
LS-1000-800-35 | 1000mm | 800mm | 0.4-0.8mm |
LS-1000-800-33 | 1000mm | 800mm | 0.4-0.8mm |
LS-1000-820-33 | 1000mm | 820mm | 0.4-0.8mm |