Automatic Viscosity Controller BML-10V

This equipment can automatically dilute ink and glue viscosity, suitable for printing machinery. It is easy to operate, no need to adjust ink manually, just set the viscosity value according to the product requirements. Use pulse pulsating inspector to inspect the viscosity, and the pneumatic diaphragm pump to circulate ink and glue.

Technique parameters:

1. Single unit machine can finish printing ink circulation, ink mixing, and ink viscosity control.

2. Improved product quality and color’s consistency.

3. Add solvent in time effectively reduced ink consumption by 15-20%, reduced printing cost.

4. Accurately control viscosity, so the workers can easily operate and have more time to focuses     on others.

5. Using the frequency of pump (HZ) as control unit guarantee the viscosity accuracy.

   (Zahn Cup No. 3)

6. All the tube valves passed through by ink and solvent are controlled by air, more efficient, more reliable.

7. Cleaning requires only half gallon solvent and clean for one minute.

8. Using bigger digital display, operator can easily observe, set and adjust.

9. Automatic oil lubrication and recycling system extends pump life 3 times.

10. Ink tube was made by special material, no distortion, no intumescent.

11. Compact and lightweight machine is easily to be removed and install.

Working Principle:

This Automatic explosion proof viscosity controller is controlled by sensing viscosity through the loads placed on the diaphragm pump. The volatilization of solvent in the tank causes the liquid viscosity thick, adding solvent causes the liquid thin. When the liquid’s viscosity thickens, the operating load of pump is increased, and then the pump’s frequency is getting low. When the liquid’s viscosity thins, the operating load of pump is decreased, and then the pump’s frequency is getting fast. Through this system keep solvent viscosity steady.

Application:     

I. Roto-gravure and flexo printing: Food packaging printing, plastic bag printing, PVC calico paper printing and all kinds of plastic packaging printing.
II. Laminating: Food plastic packaging laminating, paper laminating and rubber laminating.
III. Coating: Bank card, negative, roll film, laser plate, car decorating etc., all kinds of substrate coating.
IV.Other use: All kinds of industry which is required for liquid viscosity consistency.