Specifications

mobile charger for motorcycle
1.Fully Weatherproof.
2.USB Connection 5V 1(2)A.
3.Green LED indicator light.
4.CE

12v mobile charger for motorcycle USB connection 5V 1(2)A

1.Fully Weatherproof.
2.USB Connection 5V 1(2)A.
3.Green LED indicator light.
4.CE

  

| Features and specifications |

 

1	Input Voltage: DC 12V	9	2A blade fuse
2	Output Voltage: DC 5V	10	CE Approved
3	Max Charging Current: 1A/2A	11	12 Month Warranty
4	Reverse Voltage Protection	12	Surge Protector
5	Short-Circuit Protection	13	Overload Protection
6	Weather cap	14	Cable ties
7	On / Off Switch	15	Water Resistant
8	USB power connector	16	Waterproof gland for USB cable

 

| Dimensions |

 

Battery terminals - Switch box	80cm
Switch box - USB connection	1m
On/Off Switch Box	59*39*24mm
Unit weight	115G
Inner package	PE bag
N.W/CTN	12KG
G.W/CTN	13KG
QTY/CTN	100PCS
Mea. CTN	52*26.5*37.5cm

 

| Introduction |

 

1.Remove battery terminals,connect red lead to positive and black lead to negative terminal.

 

2.Run the cable along frame tube,keeping away from any hot areas.Ensure easy access to 

the on/off switch on black control box.Secure any loose wires with the cable ties provided.S

ecure black control box to the bike using cable ties in an area away from direct heat.

 

3.Slide the yellow gland around your phone’s data/charging connection cable.

 

4.Remove waterproof cover from the charger.Plug in USB charge lead with the yellow gland to 

form a waterproof seal.

 

5.Switch on the charger with black domed switch.

 

6.Whilst leaving the bike for long periods,switch off to avoid draining bike battery.