Specifications

1)Material: PA11, PA12
2)Oil, gas, chemical delivery
3)Oil/ageing resistance
4)Dia 4mm to dia 50mm ( 5/32'' TO 2'')

 

Features & Specification of Basic Model

Commodity: PA tube,Nylon hose

Size: made of all size
Date of delivery : Within 15-30 days upon our receipt of buy's L/C or T/T payment.
Packing:  Carton
Payment: 30%T/T advance 70% on readying goods or 100%L/C at sight .
Unit Price: USD 0.21-1.0 FOB NINGBO
Minimum Order Quantity :3000 meter

 

Nylon is now considered to be one of the most versatile engineering materials, being exceptionally stable, having good mechanical strengths, and resistance to chemical corrosion, including dilute acids and alkalis. Manufactured from type 12, nylon tube can be used in pneumatic control systems, fuel lines, lubrication lines and also within the food, beverage and brewing industry.

Our manufacturing tolerances are within B.S. 5409 Part 1.

WORKING PRESSURES AND TEMPERATURES

The working pressures quoted within the charts are based on the short term burst pressure calculated at 20°C using a 4-1 safety factor. Working and burst pressures of semi-rigid nylon is approximately 60% higher than for flexible nylon. Maximum recommended continuous working temperature is 70°C and occasional limited periods of up to 120°C. For elevated temperatures up to 110°C with intermittent use up to 140°C for limited periods then a semi rigid nylon should be used. Any increases in temperatures above 20°C will affect the short term burst pressure quoted, see graph and example. Minimum operating temperature -40°C.

All our nylon tube is heat and light stabilised and can also be produced in a semi-rigid grade of nylon in all the sizes below. Prefix Part No. SR / ANI / SR / ANM

COIL LENGTHS

Standard coil length 30 metres, alternative coil lengths are available further information my be obtained from our Technical Sales Office.

All our range of tube sizes are available in Natural, Black, Red, Blue, Green, Yellow, Orange, Brown, Grey and Pink.

Imperial

Part No.ODIDWorking PressureBurst PressureMin. Bend Radius

ANI/062	1/8"	.062"	725 P.S.I	2900 P.S.I	5/16"
ANI/075	1/8"	.075"	710 P.S.I	2840 P.S.I	5/16"
ANI/095	1/8"	.095"	680 P.S.I	2720 P.S.I	3/8"
ANI/117	3/16"	.117"	455 P.S.I	1820 P.S.I	3/18"
ANI/096	5/32"	.096"	520 P.S.I	2080 P.S.I	5/16"
ANI/137	3/16"	.137"	305 P.S.I	1220 P.S.I	1/2"
ANI/170	1/4"	.170"	375 P.S.I	1500 P.S.I	1/2"
ANI/150	1/4"	.150"	395 P.S.I	1580 P.S.I	3/18"
ANI/190	1/4"	.190"	250 P.S.I	1000 P.S.I	1"
ANI/212	5/16"	.212"	375 P.S.I	1500 P.S.I	7/8"
ANI/242	5/16"	.242"	250 P.S.I	1000 P.S.I	11/4"
ANI/250	3/8"	.250"	400 P.S.I	1600 P.S.I	1"
ANI/265	3/8"	.265"	380 P.S.I	1520 P.S.I	11/4"
ANI/295	3/8"	.265"	355 P.S.I	1420 P.S.I	11/2"
ANI/375	1/2"	.375"	285 P.S.I	1140 P.S.I	11/2"
ANI/500	5/8"	.500"	220 P.S.I	880 P.S.I	21/2"
ANI/594	3/4"	.594"	225 P.S.I	900 P.S.I	4"
ANI/813	1"	.813"	205 P.S.I	820 P.S.I	7/8"

Metric

Part No.ODIDWorking PressureBurst PressureMin. Bend Radius

ANM 4/25	4mm	2.5mm	415 P.S.I	1600 P.S.I	8mm
ANM 5/3	5mm	3mm	450 P.S.I	1800 P.S.I	10mm
ANM 5/33	5mm	3.3mm	425 P.S.I	1700 P.S.I	12mm
ANM 6/4	6mm	4mm	358 P.S.I	1432 P.S.I	13mm
ANM 8/55	8mm	5.5mm	332 P.S.I	1328 P.S.I	22mm
ANM 8/6	8mm	6mm	255 P.S.I	1020 P.S.I	32mm
ANM 10/7	10mm	7mm	317 P.S.I	1268 P.S.I	26mm
ANM 10/75	10mm	7.5mm	261 P.S.I	1044 P.S.I	43mm
ANM 10/8	10mm	8mm	200 P.S.I	800 P.S.I	50mm
ANM 12/85	12mm	8.5mm	277 P.S.I	1108 P.S.I	36mm
ANM 12/9	12mm	9mm	257 P.S.I	1028 P.S.I	45mm
ANM 12/95	12mm	9.5mm	234 P.S.I	936 P.S.I	53mm
ANM 12/10	12mm	10mm	164 P.S.I	656 P.S.I	60mm
ANM 16/12	16mm	12mm	193 P.S.I	772 P.S.I	85mm
ANM 22/17	22mm	17mm	230 P.S.I	920 P.S.I	140mm
ANM 25/20	25mm	20mm	200 P.S.I	800 P.S.I	180mm