ZX45 Drilling Milling Machine
Negotiable /Set
Min.Order:1 Set
Anhui Yiming Plastic Co., Ltd.
ZX45 Drilling Milling Machine
Product Feature
1.This machine is used for surface ,drilling and tapping .
2.This machine is good quality ,can be operatedeaslly, it is not limited to skilled operator .
3.Many of the adjustable nuts are bronze , for adjustable thread clearance and reducing
wear. These bronze parts also allow screws to rotate smoothly and improve accuracy .
4.The vertical column is very strong and stiff , which make the machine very steady and
improve accuracy of manufactured parts.
5.The machine headstock is cast iron, it has been Stress-relieved ,and precision machined .
6.Machine gears are precision ground for smooth operation .
7.Tapping can be dong in rotation working depth can be controlled by using positive stop
gauge .
8.The head can be turned in two rotations for satisfying desired angle .
Product specification
Model | ZX40 | ZX45 | ||
Max . Drilling Capacity | 40mm | 45mm | ||
Max. Face mill Capacity | 80mm | |||
Max. End mill Capacity | 28mm | |||
Max. Spindle Stroke | 130mm | |||
Max. Distance from spindle axis to colunm | 260mm | |||
Swivel angle of headstock at perpendicular direction | ±90° | |||
Max. Distance between spindle nose and table | 450mm | |||
Spindle Taper | MT4 or R8 | |||
Working Area of table | 700mmx240mm | 800mmx240mm | ||
Forward and Backward travel of table | 175mm | |||
Left and Right travel of table | 500mm | |||
Spindle Speed | 50Hz :80,145,260,375,710,1250 RPM 60Hz :95,175,310,450,850,1500 RPM | |||
Electric Motor | 1.1KW (2HP) | |||
Length | 845mm | |||
Wide | 910mm | |||
N.W. (without Stand) | 1020mm | |||
N.W/G.W | 325KG | 375KG |
Standard Accessories Special Accessories
1.Double open end wrench 22-24mm Face mill cutter 76mm
2.Allen wrench 3,4,5,6mm Parallel vise 90mm or120mm
3.Screw drive 6'' Mill Chcuk
4.Drill chuck Machine stand
4.Tapper drift End mill cutter 2mm-20mm
5.Draw bar Twist Drill 1mm-31.5mm
6.Draw bar washer