HGJ Air Flow Pipe Dryer for sawdust/wood chips/shavings
USD $2,000 - $4,500 /Set
Min.Order:1 Set
Henan Double Elephants Machinery I/E Co., Ltd.
HGJ Air Flow Pipe Dryer for sawdust/wood chips/shavings
1. Working principle:
In the dryer, high-speed hot air stream sustain raw material in the suspending state, then the material is dried. Since air stream speed is very high, and mateirls suspending in air stream, the heat transfter surface between air and raw mateiral is large, so the heat transfer rate is high.The HGJ SERIES dryer has the feature of low cost and high efficiten. It can reduce moisture from 40-45% to 8-12%.
2. Dryed Material:
It is special suitable for drying heat sensitive material like sawdust, rice hull, milled wheat straw, milled cotton/ corn stalks and so on. It also can be used for drying the grain better.
3. Fuel
Fuel for the furnace: wood waste, coal. Waste oil and so on.
Model | HGJ-I | HGJ-II | HGJ-III |
Capacity-kg/h | 300-500 | 600-800 | 1000-1500 |
Diameter of raw-mm | < 3mm & < 5mm | < 3mm & < 5mm | < 3mm & < 5mm |
Air temperature-°C | 180°C~250°C | 180°C~250°C | 180°C~250°C |
Centrifugal power-Airlock power-kw | 4 | 5.5 | 7.5 |
Material in feed | 20mm | 20mm | 20mm |
Consumption-kg/h | 10kg/h | 20kg/h | 25-30kg/h |
Weight/kg | 2000 | 3000 | 4500 |
Dimension-meter | 20*0.85*2.2m | 30*0.85*2.5 | 50*0.95*2.7 |
Moisture-max-°C | 35-45 | 35-45 | 35-45 |
Dried-max-°C | 8-12 | 8-12 | 3-10 |