3 years warrnaty 100 120 140 200 watt high lumen LED ip66 explosion proof light fittings
USD $165 - $363.88 /Set
Min.Order:1 Set
Wenzhou Recen Lighting Electrical Co., Ltd.
Application:
Hazardous zones: 1, 2, 20, 21, 22
Gas : IIA IIB IIC
Dust: Zone 21 (Group E Only). Zone 22
Temperature :T1~T4
It meets to factory or road
Ideal for use in oil fields, chemical plants, power plants, petroleum, painting areas & and areas with dust.
Three type: floodlight, projector and road light
Features and benefits
The light source module
Adopted high brightness LED light source ,equipped high efficient constant current drive power, than the gas discharge lamp saving up to 60%; all sealed LED module, water proof and dust proof, do not need to clean inner and maintenance-free; low thermal resistance of the circuit board, special design of circuit module, each unit failure does not affect the normal operation of the remaining components.
Power module
High efficient constant current drive power cooperate with intelligent power regulator; it has the flux compensation, reduce the light fades, ensure the light efficient of LED; equipped overvoltage protection, over current protection and surge current protection.
Head dissipation module
Explosion proof light housing choose aluminous alloy high pressure casting molding, after blasting the surface by electrostatic spray, effectively improve the heat dissipation performance of the housing; circuit board close aluminum housing, It can be instantly converted point heat source to surface heat source, doubling the cooling area, which will help to perform a rapid dispersion and enhances the cooling effect; shell surface having the gas dispersion groove, with the help of air flow to remove heat; high fin density, greatly improving cooling area, fully guaranteed the LED heat dissipation requirements, prolong the service life.
Optical module
Special design of optical element against each type lamp, give full play to the use of performance lamps;
No UV radiation, provide quality lighting and health care for whom work indoor for a long term.
Integrated of light source and power, equipped hinge by power cavity, convenient to install lamp;
The series of lamp product is maintenance-free, energy-saving and environmental protection.
Wall-mounted rotary angle adjustable, cable wiring, ceiling type, flush-mounted can be cable or steel pipe routing
Exposed fasteners with high corrosion resistance of stainless steel
LED light source features
High luminous efficiency
Incandescent luminous is 7-14lm/W, florescent is 50-80lm/W, high pressure sodium lamp is 80-120lm/W, most power consumption turn into heat consumption. LED luminous efficiency up to 90-120lm/W, in addition, LED light color is good, narrow spectrum, color temperature can be selected, the color is good.
lower power consumption
Each LED light bead of power is 1-3W, DC Drives, signal tube pressure 3-35V,current 0.35-1A, reaction speed, can be operated at high frequency. In the same lighting efficiency , power consumption is one-eighth of incandescent, fluorescent tubes half.
Long service life
Ordinary light-emitting electronic light field radiation, filament light easy to burn, heat deposition, light attenuation and other shortcomings. The LED light source is small volume . Light weight, epoxy resin, high strength to withstand mechanical shock and vibration, not broken. Theoretical life up to 100,000 hours, can greatly reduce lighting maintenance costs and avoid frequent lamp replacement
Safe and stable performance
Cool light source, no heat radiation, can be control light type and luminous angle, downy and no dazzle; no mercury, no sodium, does not contain substances hazardous to health. Inner microprocessor system control the strength of lighting and adjust the light way.
Environmental protection
LED is full solid light, shock resistance and impact resistance, not easily broken, waste recycle, no pollution.
Low cost
LED light source price higher than traditional light source ,but a year of investment of energy-saving recoverable light, LED is maintenance-free, save the maintenance cost ,greatly reduce cost.
Specification of explosion proof light fittings
Technical parameters | |||||
No | Specification | unit | Reference values | ||
1 | Rated Voltage | V | AC220 | ||
2 | Frequency | Hz | 50/60 | ||
3 | Light source(LED) | Power | w | 100 | |
120 | |||||
140 | |||||
200 | |||||
Luminous flux | 100 | lm | 10500 | ||
120 | 12600 | ||||
140 | 14700 | ||||
200 | 21000 | ||||
service life of light source | h | 100000 | |||
4 | The introduction of cable(diameter) | mm | 8~12 | ||
5 | Dimensions | Length | mm | 478 | |
width | 306 | ||||
height | 166 | ||||
6 | weight | kg | 13 | ||
7 | Screw thread of inlet | G3/4'' | |||
8 | Protection grade | IP66 | |||
9 | Anti Corrosion | WF2 | |||
10 | Insulation Grade: | I | |||
11 | Ex code: | Exdemb IIC T4 |
Installation drawing of explosion proof light fittings
Light distribution curve of explosion proof light fittings
Related of explosion proof light fittings
Some of model light have three rated power for your select , satified to your different demands.
RFLB103 | RFLB153 | RFLB156 | RFBL160 | RFLB165 |
RFLB104 | RFLB154 | RFBL157 | RFLB162 | |
RFLB105 | RFLB155 | RFLB158 | RFLB164 |
Packaging Details: regular packing or customized for explosion proof light
Delivery Detail: 10-20days after receiving the 30%deposit for explosion proof light
Quality Guarantee
Thank you for purchasing explosion proof light of Wenzhou Recen Lighting Electrical Co., Ltd.. Our products are in strict accordance with the ISO9001 quality control standards. Explosion proof light warranty is for 3 years (Light bulb for 1 year). In three years, any failure under normal use is repaired by our company for free (Free materials and repairs). contact our company's marketing service department, and we will provide you with high quality and efficient services.
Why us
Because we believe in providing quality not just the first time, but every time:
High Customer satisfaction
Various of products
Competitive price
OEM/ODM are welcomed
Our products patents and ISO 9001:2008
Recen CCC certification , business license and trade mark.
RECEN tax registration certification and Organization-Code-Certificate
Q: Which areas need to use explosion proof light?
A: It meets the standards and requirements for hazardous environments. Ideal for use in oil fields, chemical plants, power plants, petroleum, painting areas and areas with dust.
Q: What is the advantage of explosion proof light?
A: It make the worker more safe, because the lamp having function with explosion-proof, dust proof and water proof. In flammable and explosive area to safe work.
Q: Do Led have a longer life than incandescent bulbs?
A: Yes. Incandescent bulb generally last 500-2000 hours, whereas Led may last for 20000-50000 hours or around 20-40 years. this means Led may last 25 times longer than incandescent.
Q: Do the surface of explosion proof light will rust?
A:No, we choose the advantage spay printing of surface, no rust, do not change color, anti rain, could be use outfield for a long terms
Q: How does your factory do regarding quality control?
A: Quality first. We always attach great important to quality control form begin to end. Our factory has gained CCC,CQC authentication.
Mia xu
mobile:+ 86 188 5886 8020
E-mail : xyj(at)
whatAPP:0086 156 5779 1625
wechat: xufanxi1205
Skype:miaxu1205
Linkedin: miaxu
contact us now to order your products!!!