Specifications

Shaping machine B635A
1.Toolhead can be swivel 60 degree
2.Easy operation
3.Metal shapter

Shaping machine B635A

 

Advantages:

1. Planner bench can rotate

2. Feed system use cam mechanism to adjust feed rate

3.With cutting system overload safety device

 

Specification:

Specifications		B635A
Max. planning length		350mm
Max. distance between ram bottom and table surface		330mm
Max. worktable moving distance(horizontal)		400mm
Max. worktable moving distance(vertical)		270mm
Leading surface of the planer to bed		550mm
out of the maximum distance
The max. displacement of the ram		170mm
Max. turning angle of the worktable (no vise)		±90°
Max. turning angle of the worktable (vise)		±55°
The turret maximum vertical travel		110mm
Ram reciprocating frequency per minute		32,50,80,125
Table feed amount	Wheeled round a tooth(vertical)	0.18mm
per reciprocating motion of ram	Wheeled round a tooth(horizontal)	0.21mm
	Wheeled round 4 tooth(vertical)	0.73mm
	Wheeled round 4 tooth(horizontal)	0.84mm
Motor power		1.5kW 1400r/min
Packing size		1530x930x1370mm
N.W./G.W.		1000/1200kg

 Features

 

 Shaper is mainly used for planning the plane on the small and medium-size workpieces in small batch production of a single piece, forming the surface and grooves . Its five characteristics:

 

 

 

1. Planner bench can turing angle of the table with horizontal and lift moving mechanism; for planning the inclined plane, thereby expanding the scope of use.

 

 

 

2. Planner feed system uses a cam mechanism to adjust the feed rate. It is very convenient to change the feeding rate.

 

 

 

3. Planer equipped with cutting system overload safety angencies. Once occur careless operation, external influences or cutting overload, it will shift to self-skid, and non-sestructive the machine.

 

 

 

4. Gap between the ran and the bed rail, the speed gear and the main sliding guide surface, will be lubricated by the pump shot oil.

 

 

 

5. Planner is equipped with a clutch and parking brake device. So do not need to cut off the power when changing the speed, stard the machine or braking the machine.

 

 

 

 

 

 

Any questions you can contact me freely,

 

Tel:+86-0632-5810219    Skype: shaojie_2010