Specifications

This machine is used for making clay pipe, clay brick, roof tile, honeycomb ceramic, and so on.

one、equipment purpose and the range of using

This vacuum forming extruder is basic on the vacuum forming extruder TCJ350, and improved to the machine of can produce ceramic wide board equipment, and its extruding power is bigger and the products density is higher. You should use it with vacuum pump in normal in order to get rid of dirt in gas, and improve plastic of pug whisking screw and extruding screw are drive apart by frequency conversion stepless timing motor, you can control the speed of turn of whisking screw and extruding screw, it is fit for extruding different kinds of products, Extruding screw is easy to be removed, it is also fit for extruding different kinds of products.

Two 、main technical parameter

 

Data	Variable
Moisture of pug	16-21%
Capacity	5-6t/h
Rotate speed of stiring screw	≥12.8 r/min
Rotate speed of extruding screw	≥19.8 r/min
Diameter of extruding screw	φ280mm
Pressure of extudsion	≥3.5MPa
air clutch working press	0.5-0.8MPa
Vacuum degree	98kpa
Motor power	55kw
Overall size	About 4365×1950×1485mm
Net weight	7500kg