BLR/AW&BLR/AF SEALED AND FLANGED OIL SEPARATOR FOR REFRIGERATION

GENERAL DEFINITION

• General intended purpose of Oil Separators is to separate oily discharge gases and ensure regular and correct recycling of oil to compressor’s case.
• Oil separators are used in order to form high oil temperature and prevent migration of cooling liquid and gas, and separate cooling liquid in oil and taking out gas.
• Buoy system passes through very accurate production process, and then its totally faultless operation is ensured through various tests.
• Oil separator must be selected according to properties of compressor in use.
• Oil separators must be used vertically between compressor and condenser.
• Standard type oil separators are fairly easy to used because there is no replaceable parts.
• These are more low-cost products compared to other types of oil separators.
• Oil separators are mechanical product, and therefore they undergo fairly accurate production process.
• Materials used in the product; buoy ball and ratchet, oil filter and separator, and valve pin are fully made of stainless material.
• Oil return tube and buoy valve are made of brass material

Connection Parts

• We determined Input and Output connections according to volume of products.
• ODS connection is used in standard products.
• Different connection may be used upon request.

  DRAWING&PICTURE

1 - Inlet Connection

2 - Outlet Connection

3 - Oil Return Connection( 3/8" SAE)

• Application and internal design are clearly shown in the above. 

TECHNICAL DATA

•  Working Pressure[PS] : 33Bar
• Test Pressure [PT]  : 48Bar
• Allowable Temperature [TS]: Min.- 10°C/Max.-130°C
• Color [RAL] : 5009
• General Tolerans [mm]: ± 5

Contact information