Model:FN-450   Name:Automatic Wood Rolling Machine

The machine used for shrink film packaging machine of good Over-wrapping plate without artificial assistance, a PLC control and man-machine interface operation, a high degree of automation, packaging, fast, simple manipulation, stable operation, packaging, the results are satisfactory, at the same time can reduce the use of the equipment Artificial, packaging materials, such as packaging costs. Meet export packaging requirements.

Packing machine, automatic packing machine, wood packing machine door packing machine

Technical Parameter:

1.Main frame of machine    2.Feeding table    3.Operating control panel    4.Elextrical cabinet    5.Turnplate

Function:

(1) Actomatic Wood Rolling Machine is consist of working table, turning organization, pressing organization, electrical system organization, feeding organization

(2) Has two kinds of mode:(1)Under Manual mode, can press/release, up/down, forward/reverse separately.(2)Under Automatic mode, can go back to original location automatically after finished the work.

(3) When the door panels are reay on the feeding table, press the transfering button, the transfering belt will bring the panel  into the packing unit. When the panels is detected by the optic-electron sensor, the packing band will be put out, and the pressing unit press the panle, at the same time, the turning table start to rotate; after the turning table rotating, the band tighten facility retract and loose the band; the band will be tighten packed on the panels round by round while the panel is passing the packing unit. During panel pass the packing unit, antoher optic-electron sensor is actuated, the rear press unit will press the panel, and panel is transferred by the rear transferring table.