Specifications

CE CCC SGS RoHS ISO9001
energy saving and environmental friendly
10 years quality warrant
tank can put anywhere of house

Split pressurized solar water heater

 

The split solar water heating system is such a system that separates the heat collector from the water tank, and transfers the solar energy collected by the heat collector to the water tank through the natural or forced cycle of medium to make water hot.

 

 Characteristics

 

1.The heat collector and  water tank are separated, and the system works under pressure.
2.Intelligent controller to assure the system runs automatically.

3.The storage water tank could be placed in any place of the room.

4.The solar collector could placed anywhere such as the balcony, southern wall, sliding roof, etc.

5.The water tank is placed indoors and it is in favor of reducing the heat loss of water tank.

6. You can have hot water 24 hours per day.

 

Components:

1. Heat pipe solar collector (solar thermal collector)

2. Pressurized storage tank, Water tank capacity: 100 L;150L; 200L; 250L; 300L; 350L; 400L; 450L; 500L

3. Working station

 

Heat Pipe vacuum tubes Brief Indtroduction   

    

Evacuated tube with copper pipe, and there is anti-freeze liquid inside as medium transfering heat.

 1. Diameter and length: 58mm / 1800mm

 2. Glass material: Borosilicate glass 3.3

 3. Tube thickness: 1.6mm or 2.0mm

 4. Resistant hail: 25mm or 38mm

 5. Life span: 15 years to 20 years

 

Heat pipe solar collector brief information 

 

1.vacuum tube size: 58*1800

2. stand frame:quality galvanized steel                          

3.insulation layer:polyurethane foam 55mm thickness

4.quantity of heat pipe tubes in a collector: from 10 pieces to 30 pieces 

ing pressure:0.6Mpa

6.life span: 15 to 20 years

 Pressurized storage tank brief introduction

 

1.inner tank:1.5mm SUS304-2B stainless steel                                     

2.outer tank:0.5mm color steel                   

pper coil heat exchanger: red copper diameter 12mm         

4.insulation layer:polyurethane foam        

5.rated pressure:0.7Mpa                    

6.accessories: T/P valve, Mg anode, electric heater