Specifications
This Heat exchanger for swimming pool heat pump is design for a various refrigerant swimming pool heat pump heating systemFeatures & advantage of Heat exchanger for swimming pool heat pump
1. Shell & coils construction made heated water stored in the tank.
2. This heat exchanger is constructed with titanium or stainless steel 316L tubes with spiral corrugation on the surface. This tubes had increased heat transfer efficiency and produce low pressure drop. Also, it enhanced refrigerants backflow to compressor.
3. Different material construction is available as below. And high anti-corrosion titanium has a long time working time without downtime.
Shell side | Corrugated heat exchanger tube side | ||||
Material | Liquid | Design pressure | Material | Refrigerant | Design data |
PVC | Salt water | 0.6MPa | Pure titanium | R22,R134a R407c,R404a,R410a, R600a etc. | 4.5MPa, 200°C |
SS304 | Fresh water | 1.3MPa | Stainless steel 316L | ||
SS316L | Brine water | 1.3MPa | |||
Titanium | Salt water | 1.3MPa | Cu/Ni 90/10 |
1)Application of Heat exchanger for swimming pool heat
Heat Pump Pool Heater
Heat pump spa heater
Fish tank heater
Chemical heating or cooling process
Specification and performance data of Heat exchanger for swimming pool heat pump
Model | Heating Capacity | Water flow | Connenctor | ||
RT | BTU/h | Kw | m3/h | BSP/NPT | |
SC-0.75 | 0.75 | 9,000 | 2.64 | 1.5 | 1" |
SC-1 | 1 | 12,000 | 3.52 | 1.5 | 1" |
SC-1.5 | 1.5 | 17,000 | 4.99 | 2.2 | 1" |
SC-2 | 2 | 24,000 | 7.04 | 3 | 1 1/2" |
SC-3 | 3 | 36,000 | 10.58 | 4.5 | 1 1/2" |
SC-5 | 5 | 58,000 | 17 | 7.5 | 1 1/2" |
SC-7 | 7 | 78,500 | 23 | 10.5 | 1 1/2" |
SC-10 | 10 | 110,000 | 32.27 | 15 | 2" |
SC-12 | 12 | 157,000 | 46.05 | 20 | 2" |
Note:
The above heating capacity is based on normal heat pump working data.