Specifications

1. High efficiency,
2. Energy saving and environment-friendly,
3. Homogeneous metal components,
4. Little smelting loss,

Features of Furnace Body

(1)The mechanical part for IF Induction Furnace consists of Furnace Cover, Furnace Body, Fixed Frame, Water&Power Accessing-in System, Hydraulic Unit and so forth;

(2)Furnace Body consists of Induction Coils, Magnetic Yoke, Furnace Frame, Leakage Alarm Device and so forth;

 

1. Induction Coil should be fired of Anaerobic Rectangle thick-walled Red Copper, thickness of Tube Wall should be uniform, and Hydroelectric Connectors should be durable and easily disassemble.

there are water-cooled coils at the upper part and lower part of Induction coil to make the lining material being heated uniform and even axially as well as to extend service age for the furnace liner. To strengthen the insulation effect of induction coil, the surface of induction coil should be painted with high-strength insulation resin, and at inside, outside and interims of the induction coil should be applied with Refractory Daub(refractoriness 1800°C). The Refractory Daub is with excellent insulation and heat shielding performance, which will protect the induction coil from being damage if the furnace liner is broken.

With plenty of experience accumulated from designing and using, certain quantity of experimental data about Height-Diameter Ratio (H/D Ratio) is built up. We applied different H/D Ratio for inductors with different capacity; this Computer Optimal Designed H/D Ratio greatly improved the efficiency of inductor.

 

2. Red Copper are applied for the Inductor material

A Content of Copper 99.95% B Tensile Strength 220kg/cm

C Stretching Rate 45% C Hardness HB35

 

 

Rated Capacity (t)	Rated Power (KW)	Rated Frequency (HZ)	Transformer Configuration		Rectifier Pulse	Inductor Voltage (V)	Melting Rate (1600°C) (t/h)	Power Consumption (KWh/h)
			Capacity (KWA)	Secondary Voltage (V)
20	10000	250	2×6300	2×6φ1400V	24	3800	21	500
15	10000	250	2×5000	2×6φ1400V	24	3800	16	500
10	6000	500	1×6300	6φ1250v	12	3600	11	550
5	3500	500	1×4000	6φ1000V	12	3400	6	580
3	2500	500	1×2500	6φ950V	12	3400	3.5	600
2	1500	650	1×1600	6φ950V	12/6	3400	2.5/2	680
1.5	1000	700	1×1250	6φ800V	12/6	3200	1.8/1.5	600/700
1	600	1000	1×500	6φ750V	12/6	3200	1.3/1	650/700
0.75	400	1000	1×400	3φ380V	6	1600	0.8	700
0.5	300	1000	1×250	3φ380V	6	1600	0.6	700
0.35	250	1000	1×200	3φ380V	6	750	0.4	700
0.25	200	1000	1×160	3φ380V	6	750	0.28	700
0.15	100	1000	1×100	3φ380V	6	750	0.18	700