Product Details

SAIP/SAIPWELL Heating and Cooling Dual Cabinet Temperature Controller ZR011

Heating and Cooling Dual Thermostat

Cabinet thermostat

Temperature controller

SAIP/SAIPWELL Heating and Cooling Dual Cabinet Temperature Controller ZR011

Two thwemostat in one casing:

1,Thermostat (contact breaker, normally closed) for regulating heater.

2,Thermostat (contact maker ,normally open) for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded. Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.

3. Temperature controller passed IP20,CE ,RoHS.
4. Samples will be offered to you for our future cooperation.
5. OEM/ODM service are offerred.
6. Payment: T/T Advance, L/C 100% Payment if total amount less than $10,000USD.
7. Shipment: by air/sea or express.

SAIP/SAIPWELL Heating and Cooling Dual Cabinet Temperature Controller ZR011

Switch temperature difference	7K (± 4K tolerance)
Sensor element	thermostatic bimetal
Contact type	snap-action contact
Contact resistance	< 10mΩ
Service life	> 100,000 cycles
Max. switching capacity	250VAC, 10 (2) A
	120VAC, 15 (2) A
	DC 30W
EMC	acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection	4-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm²
Mounting	clip for 35mm DIN rail, EN60715 (or for exit filter EF 118 Series)
Casing	plastic according to UL94 V-0, light grey
Dimensions	67 x 50 x 46mm
Weight	approx. 90g
Fitting position	variable
Operating/Storage temperature	-20 to +80°C (-4 to +176°F)
Protection type	IP20

Art. No	Seting range		Seting range
01172.0-00	contact breaker, normally closed	0 to +60 °C	contact maker, normally open	0 to +60 °C
01172.0-01	contact breaker, normally closed	-32 to +140°F	contact maker, normally open	-32 to +140°F
01175.0-00	contact breaker, normally closed	-10 to +50 °C	contact maker, normally open	-20 to +80 °C
01175.0-01	contact breaker, normally closed	-14 to +122°F	contact maker, normally open	-68 to +176°F
01176.0-00*	contact maker, normally open	0 to +60 °C	contact maker, normally open	0 to +60 °C
01176.0-01*	contact maker, normally open	-32 to +140°F	contact maker, normally open	-32 to +140°F