German parts asembled MP300EM Dual-piston mortar pump with 12 warranty

MP300EM is a product for spraying and delivering cement mortar and self-mixing mortar. It is widely applied to spray various kinds of mortars.

It can deliver and spray various kinds of mortars which diameter are from 0 to 8 mm and be used for delivering the field mixed mortar on the job-site, with strong power, high universality and wide application. The vertical height of pumping is up to 100m, the horizontal distance up to 300m.

The chrome plating material cylinder technology for concrete pumping is adopted. For the abrasion parts, the service life is long, the cost is low and the economical efficiency is high.

The double-piston cylinder (a single cylinder plus a compensating cylinder) is adopted. The no-pulse delivery can be achieved during mortar delivering and spraying. The mortar can be sprayed evenly on high-level working planes. The performance in applying the mortar to the wall is good, and the technology is advanced among similar products all over the world.

Its displacement is high. It can be used as the equipment for high-level mortar pumping. It can greatly enhance the efficiency and reduce the labor cost during the combined operation of delivering and spraying.

The application scope of MP300EM double-piston mortar pump is widely. It can be used for:

Material delivery

       Paving the ground

       Pouring walls

Plastering

        Spraying mortar on the interior and external walls

        Plastering and building walls

         Filling in the joints

         Repairing the damage on concrete surfaces

Standard configuration:

1) 170L agitating vessel

2) 200L hopper

3) Double-piston cylinder (a single cylinder plus a compensating cylinder)

4) Integrated air compressor

5) 11kW three-phase AC motor

6) CE standard control cabinet

7) Standard carried spare part set

Optional devices to be installed:

1) DN50 and DN35 mortar pipes

2) A 20m compressed air pipe

3) DN35 spray guns (provided with rubber nozzles of various diameters)

Security configuration:

1) Mortar hose overpressure protection

2) Compressed air overpressure protection

3) Overload circuit switch protection

If you want to get the Vedio of the machine,Please add our WhatsApp:008-13561786902

ISEAN always commit to providing cost-effective, quality assurance original parts. ISEAN providing customers with the highest quality parts, at the same time, we will provide you with quality services, including parts replacement, accessories warranty, equipment maintenance, etc. If because of the use of non-ISEAN parts caused quality problems, we will not accept any liability, and we have the right to refuse to provide related services.

Customers can inquire the provided accessories through required accessories manual, you can also consult your dealer or service engineer for more detailed information.

To make your device more efficient, choose pure ISEAN original parts is your right choice.

1. Safe operation training for operators

Introduction: Training courses for the safe operation of equipment operators, the main subjects are the safe operation of the equipment, maintenance, Troubleshooting.

2. VIP training

Introduction: Communication and discussion equipment, maintenance, repair, management and evaluation experience, explain the company's latest product technology.

3. New products, new technology training

Introduction: Mainly to do specialized training for new products and new technologie

Contact Person: Jeff .Su

WhatsApp/Tel: 0086-13561786902

Email address:jeffsu918  at 

                       277423885  at  

: 

German parts asembled MP300EM Dual-piston mortar pump with 12 warranty