color screen protector for iphone 4 3d screen protector
Negotiable /Piece
Min.Order:500 Pieces
color screen protector for iphone 4 3d screen protector
Material | Total Thickness | Use layer thickness | Transparency Rate | Block the Ultraviolet Rate | Block the Infrared Rate | Hardness | Abrasion resistance |
High Clear | 0.23 | 0.12 | 98% | 17% | 8% | 4H | 50 |
Anti-Glare | 0.22 | 0.11 | 92% | 20% | 11% | 4H | 60 |
Fingerprint Proof | 0.22 | 0.12 | 95% | 25% | 15% | 4H | 50 |
Diamond | 0.253 | 0.12 | 97% | 14% | 10% | 3H | 40 |
Mirror | 0.38 | 0.29 | 68% | 100% | 17% | 3H | 40 |
Privacy filter | 0.48 | 0.44 | 60% | 73% | 44% | 4H | 50 |
Explain | |||||||
High Clear | 17% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Anti-Glare | 20% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Fingerprint Proof | Fingerprint proof, 25% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Diamond | Flash Diamond surface, 14% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Mirror | 100% UV Protection: Reduces eye strain caused by the LCD screen | ||||||
Privacy filter | 73% UV Protection: Reduces eye strain caused by the LCD screen. Brightness will be reduced by 35 percent. |
Instructions for use:
1. the first step is essential to clean the screen with fiber cloth that came with the screen surface.
2. paste the face recognition.the end of film labeled "step1" label, layer from the film are "step2" tab.
3. Remove the protective layer of the label with the "step1" . gently pull the protector end of film, will be pasted face down, align the upper edge of snap to the screen, while the side will protect the base film paste slowly out, when the paste slowly as possible and confirm the attached as well to avoid bubbles.
4. Finally, remove the label with a protective layer "step2".the surface layer from the film torn off, if
found accidentally left a small bubble, the available scratch card comes with a soft bubble attached
flat push it away