CUT50C New Mini Inverter 220V DC Plasma Cutting Machine With Buit-in Compressor
Negotiable /Set
Min.Order:1 Set
Shanghai Rongyi Welding Corporation
Wholesale Rongyi CUT50C New Mini Inverter Mosfet DC Air Plasma Cutter With Buit-in Air Compressor
Shanghai Rongyi CUT50C New Mini Inverter DC Plasma Cutting Machine With Buit-in Air Compressor
Shanghai Rongyi CUT60 toshiba Mosfet Inverter DC plasma cutter
Shanghai Rongyi CUT60 toshiba Mosfet Inverter DC plasma cutter
Shanghai Rongyi CUT-40F INVERTER toshiba mosfet PILOT ARC AIR PLASMA CUTTER
1. MOSFET inverter and precision constant current feedback control technology, soft switch, DC output, 100 kHz of inverter frequency;
2. Wide working voltage range, strong adaptability to electricity power grid, high ability of interference resistance, automatic voltage compensation, stable cutting current and steady arc;
3. Compact structure, portable, energy saving, easy for maintenance;
4. For CUT-40 and CUT-50, we also can provide 110/220v duel automatic input voltage shift, for CUT-60, we can also provide both single phase 220v and three phase 380v input voltage;
5. Intensive arc, high cutting speed, narrow and smooth kerf, continuous current regulation, little distortion for work-piece, safety and reliable for operation;
6. Applicable to automatic cutting equipment;
7. Suitable for carbon steel, stainless steel, aluminium, copper, etc.
8. Complete accessories: air cooling cutting torch, earth clamp with cable, compressed air regulator, etc.
9. "C" means COMPRESSOR, this model with buit-in compressor, so it is very easy and convenient both for family and industry use.
Ø SPEC.
Model Spec. | CUT40C | CUT50C | ||
Power supply voltage | 220+15% V / 50~60 Hz | |||
Power frequency | 50~60 Hz | 50~60 Hz | ||
Power supply capacity | 4.8 kVA | 6.3 kVA | ||
Rated input current | 22 A | 28 A | ||
No-load voltage | 230 V | 230 V | ||
Output current range | 20-40 A | 20-50 A | ||
Output voltage range | 88-96 V | 88-100 V | ||
Duty cycle | 60% | 60% | ||
Efficiency | 85% | 85% | ||
Tip hole diameter | 1.0 mm | 1.0 mm | ||
Arc striking model | Touch / Untouch/ Non-HF | Touch / Untouch/ Non-HF | ||
Cosφ (η) | 0.93 | 0.93 | ||
Air pressure | 0.4MPa | 0.4MPa | ||
Cutting thickness | Steel | 1-8mm | 1-10mm | |
Aluminium | 1-6 mm | 1-7 mm | ||
Copper | 1-4 mm | 1-5 mm | ||
Air flow | 110 L/min | 120 L/min | ||
Insulation grade | B | B | ||
Protection grade | IP 21S | IP 21S | ||
Net Weight | 19.5 kg | 19.5 kg | ||
Dimensions (mm) | 450*300*300 | 450*300*300 |
This is CUT50C New Mini Inverter DC Plasma Cutter With Buit-in Compressor
Perfect Design Connectors on the front panel
Two Special Design fans on the back of machine
Nice Filter of the built-in compressor
High Quality Cutting Torch SG-55 with the machine