ANSI150l  flange waste water electromagnetic flowmeter

Main technical parameter

Nominal path series DN(mm)

Piped PTFE Lining:

10 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Piped rubber lining:

40 50 65 80 100 125 150 200 250 300 350 400 500 600 800 1000 1200

1.Flow direction:positive and negative net flow

2.Measure extention ratio:150:1

3.Repeating erro:±0.1% of the meterage

4.Accuracy grade :pipeline style: 0.5 1.0

5.The temperature of themeasured medium:

Ordinary rubber underlay:-20~+60

High temperature rubber underlay:-20~+90

Polythene underlay: -30~+100

High temperature underlay:-30~+180

6.Rating work pressure:

Pipeline style : DN10-65:≤2.5MPA

DN80-DN150:≤1.6MPA

DN200- DN 1200:≤1.0MPA

Technical Specifications:

• Size: DN 15 ~ DN 3200
• Medium: Conductive liquid, slurry
• Medium Temperature: ≤160^oC
• Conductivity: ≥ 5 μS/cm
• Accuracy: ±1.0%, ±0.5%
• Rated Pressure: 0.6, 1.0, 1.6, 4.0MPa
• Display: Instantaneous flowrate, total flow, velocity, flowrate percentage with back light
• Signal Output: Analog 4 ~ 20mA, isolated,
• Power Supply: Single-phase 85 ~ 22V AC, 45 ~ 63Hz, power∠20W; 24V DC, 10VA
• Converter Type: Compact, remote
• Protection Grade: IP65/ IP68
• Velocity: 0.3 ~ 10m/s
• Liner: Rubber ,PTFE
• Flowing Direction: Forward, Reverse
• Electrode Material: 316L, Pt, Ta, Ti, HB, HC
• Electrode Type: Standard,
• Flange Material: SS/ CS
• Ambient: Temperature: -25 ~ +60^oC, Humidity: 5 ~ 60%
• Communication: RS-485/ Hart 

Company apperance