Product Details

production introduce

Main machinery for concrete prestressed concrete pole/pipe/pile production line

Centrifugal spinning machine for concrete poles and concrete pole steel mould for prestressed spun concrete electrical pole are two main equipments, which are used for producing prestressed and reinforced concrete poles and other cement products with a variety of different diameter and length.

(1)overview of Centrifugal spinning machine

Centrifugal spinning machine for prestressed spun concrete pole is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of prestressed concrete pole are good quality with high srengtht.

The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are well sealed and reliable, long service. Random electric control equipment is complete and easy to operate.

(2) overview of Prestressed Concrete Spun Pole Mould

Prestressed Concrete Spun Pole Mould is used for concrete electrical pole manufacutring. Its mainly manufacture technology is longitudinal tension by steel wires. During rotation of mould, it can squeeze out the excess water contained in concrete under centrifugal force. Thus, it can greatly improve the concrete density and strength.

Technical parameter of prestressed concrete pole

top diameter (mm)	wheel distance (mm)	Running wheel diameter (mm)	Length (m)
150	2000	600	7-12
170	2000	600	7-12
190	2000	650	7-15
230	2000	650	6-9
300 equal diameter	2000	600	6-9
350 equal diameter	2000	650	6-12
310	2000	650-780	6-15

Technical parameter of PHC piles

Working Principle of electric prestressed concrete pole making machine

1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.

2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.

3. The speed of separation is slow when the viscosity of slurry is high.

4. It is good for centrifugal sedimentation when the slurry density is different in each component.

Features of electric prestressed concrete pole making machine

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times.

3. Rigidity increases 1~3 times.

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).

5. Good durability, can delay the existence and expansion of cracks.

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation

photo show for main machinery

our service

1.Complete production line supporting machines and all necessary accessories with high performance and good quality;
2. Free Service of plant structure design and layout plan drawings and other necessary construction drawings and guidance of construction work,office, warehouse etc and related drawings according to customers’ requirements.
3.Installation and commissioning of all production machines as well as the workers training.

FAQ

1. Specifications of Concrete Poles . Such as Length , Top Diameter, Bottom Diameter , Taper Ratio, Ultimate Load, Breaking Load etc.

2. Type of concrete Pole: Pre-stressed or Reinforced .

3. Productivity

4. Old Factory and machines updating or New Concrete Pole Plant Building ?

clients

We promise our customers:

High Qaulity ,

Professional Guidance,

Satisfactory After-Sale Service!

Warmly Welcome To Visit Our Factory !