Dry Feedstuff  Horizontal Ribbon Mixer     

The machine is composed of container, screw paddles and transitional parts; the screw paddle are generally made into 1 layer or 3 layers, the outer screw converge is the material to the centre front two sides, and the inner layer of screw conveys the material to the two sides from the centre, so as to form convention mixing. The cubage can be made into rotundity, so the jacket can be played in reaction and drying.

Features of  Dry Powder Horizontal Ribbon Mixer

1.It is suitable for mixing materials of powder-powder and power-liquid, especially for paste,powder and thick materials, such as putty, stone coatings, metal powders etc.

2.It is a new type of mixing equipment with high efficiency, high uniformity, high load factor,low energy consumption, low pollution and little destruction to frangible material.

3.The major sections of a mixer are barrel, ribbon agitators, feeding ports, discharging port and driven unit.

4.Double ribbon mixer drive the material from two ends to centre through the help of the outer ribbon, while the inner ribbon push the material from centre to two ends, thus, material achieve a high mixing effect at short time.

5.The ribbon mixer can be equipped with heating or cooling jacket if temperature control is required. We will add spraying or atomizing unit inside the tank. 

Applications of Dry Powder Horizontal Ribbon Mixer

The ribbon mixer is generally used in the mixing of viscous or adhesive powder material, or the mixing

of powder which needs to add liquid, and paste material. Meanwhile, because it is different to clean viscous material, the machine is suitable for the mixing case, where the output is large and there is

no need of displacing material variety frequently.

Special Advantages

1.Flexible material selection
Material can be chosen from carbo steel, manganese steel, ss304, 316L and 321; besides, different material can also be used in combination. Material is different between the part contact with the raw material and the parts don’t contact with the raw material.Surface treatment for stainless steel include sandblasting, wiredrawing, polishing, mirror polishing,all can be used in different parts of a mixer.

2.Reliable driven unit
The driven unit, power and output speed are varied according to different raw material, starting method, and processing. Options for motor: general motors, explosion-proof motors, variable frequency motor, high efficiency and energy saving motor.  Commonly used reducers: R-series, K-series, and F-series gear box; cycloidal reducer, universal gear reducer, planetary gear reducer. Commonly used connection: direct connection, pulley connection,hydraulic coupler connection.

3.High efficiency mixing unit
Different main shaft agitators can be equipped according to the properties of raw materials.
Materials commonly mixed are: different kinds of powder to be mixed with each other, batches mixing for the same material, powder with a small quantity of liquid, liquid with some powder, like slurry, thickening or diluting slurry, granule with powder, granule with granule, agglomerated material breaking and mixing, and cooling or heating. The main shaft agitator could be: inner and outer ribbon, paddle and ribbon, disconnected ribbon, and shaver-shaped agitator.

4.Excellent discharging unit

Standard valve for horizontal plough shear mixer is pneumatic planar flap valve. When close the valve,

the planar flap match the mixing barrel perfectly, this makes no mixing dead zone and better mixing

effect. The drive types of valve are Manual, pneumatic, and electric. Valves for consideration: powder spherical valve, cylinder valve, plum-blossom dislocation valve, butterfly valve, rotary valve etc.

Technical Parameters

Services

1.Installation,Debugging.

  Provide installation files, technical data and related soft copies or videos etc to ensure  customer could   install and debug by themselves.

2.warranty
  The provider guarantee the vibrating screen could meet production technical standard and                       performance requirements indicated in the contract, warranty:

  24 months for the machine  after delivery ,12 months for the motor after delivery.
3.Technical Support
  Our company will make occasional call to find problems and solve them in time.

  Provide  technical support timely.
4.Response Time(24 hours)
  Contact us through Telephone or Email, we will respond within 24 hours.

Company information

Mainly manufacture vibrating screen(linear/round rotary sieve shaker,vibrator

screen with ultrasonic ,tumbler rotary sieve,flow through filter sieve machine etc), mixer,

feeder,conveyor,crusher and related products(magnetic separator) etc.

1.Past through the CE&ISO9001:2008
2.One of 10 Henan E-businessmen.
3.Excellent Equipment Manufacturer of China

Your success is our business!

My name:Alma Zhang

Mobile phone:86 18738581019

Tel:86 373 5031958   Fax:86 373 3532216

QQ:2080842285

almacnzy005