This plastic Concrete Pavement Mold is a Garden DIY Tool for making Pathways.

How to use this Concrete Paver Mold to build the pathways:

Step 1:

 Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.

Step 2:

  Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.

Step 3:

  Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.

Step 4:

Following the contours of the mold, smooth out the concrete, wiping away any excess.

Step 5:

 Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you’re creating a curving pathway.

Step 6:

After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around 

All Available Models:

9 cobble stones Pavement Mold

9 cobble stones Pavement Mould 

7 Cobble Stones Paving Block Mold

10 blocks Belgium Pavement Mold

  The mould of the plastic concerete mold

The production of this pavement mold

 A. each pavement mold to a pp bag + instruction manual, then to a color box, 8pcs per carton

 B.  each pavement mold to a pp bag, 10pcs to a carton

Fast reaction to customizing packages;

Quick sampling;

Strict Quality Control;AQL 2 level is our basic inspection standard;

Fast Shipping;

Skillful Documentation and shipment tracking

Ideamake Houseware is devoted to develop and introduce to the world market Fun,Fresh and exciting housewares that makes your life easy and interesting.

Our motto is High Design,Quality and Uniqueness. Well known designers from Europe and China form the core of our initial product launch.

Our goal is to develop products which aer different,approuchable,functional,fashion forward,elegant and fun, to enrich everyday life.

Successfully developed products for Prym,QVC,US Navy,JML Direct and many other important customers, due to tade secret protection, we shall explore more during our negotiation by email.

1. Are you a manufacturer or  trader?

we had the facory in 2004 and at that time our factory only produce plastic parts for other companies; and at same time we had an iron factory for making springs and wire puzzles; In 2006 we began develop our own products and export by our own, and during the coopeperation with our customers, some customers would require us to purchase and consolidate some shipments for them, based on this new requirement ,we had to register our own trading house in the downdown while at the same time, developing and expanding our production line in our own factory.

2. Do you have a website to see all of your products?

We do have a website to see our full range of products, the website is  

we will upload new products from time to time

thanks for visiting our site often or set as favorite

and wish you can find interesting products on our site.

3. Do you supply small quantities?

We support Small order quantity for some products, it depeds.

please inquire from us for more.

4. How to contact with you?

our mail box is: sales at

you can mail us now for more detailed info.

5. Do you have other types of the Bathroom products?

Yes,Now I recommend some hot and useful products