Description
The Desco Ionizer Motion Sensor is designed to
automatically activate an ionizer when an operator is
present at a workstation and turn off when the workstation
is vacant. This product ensures that the ionizer is activated
when required. It also conserves energy and increases
maintenance intervals of the ionizer by deactivating it when
the workstation is vacant. The Control Unit is capable of
switching up to 5 amps at 120VAC and is fuse protected.
The Ionizer Motion Sensor consists of two components: the
Sensor Unit and Control Unit. The control unit connects
between the AC power cord and the ionizer power input
using standard IEC type (C13/C14) connectors. The sensor
unit is placed in a position to “detect” an operator up to three
feet away. The sensitivity levels can be adjusted to: low
(12 inches), medium (24 inches) or high (36 inches). The
Sensor Unit should be mounted flush with the front edge of
the mounting surface whenever possible. This is done to
prevent reflected light from the mounting surface. The two
components communicate using a standard 6-pin modular
cable.
The Ionizer Motion Sensor utilizes a unique infrared light
and band pass filter to prevent interference from other light
sources. The band pass filter uses a reflected infrared light
with the specific frequency to sense the presence of the
operator. It does not require continuous motion to remain
activated. The deactivation delay time can be set to 1
minute, 10 minutes or 1 hour periods. This delay prevents
the ionizer from turning on and off frequently if an operator is
only away from the workstation momentarily.

 Packaging
1 Sensor Unit
1 Control Unit, 120VAC
1 Modular Cable, 2'
1 Modular Cable, 7'
2 Hook and Loop Fastener Strips
2 Screws