anti-static brush

ESD brush

antistatic brush

static brush

ESD Brush

anti-static cleaning brush, esd soft brush, conductive esd brush hard/soft bristle
ESD Brush made in Electrostatic Discharge (ESD) protective materials protect contents from static electricity and electrostatic damage.These materials are designed to absorb the charge and pass it to the ground , saving you thousands of dollars by reducing or eliminating product damage. It conforms to ANSI/ESD S20.20*1999 requirement.This standard requires conductive materials surface resistance to be <1.0 x 10^4 ohms and dissipative materials to be >1.0 x 104 ohms to <1.0 x 10^9 ohms when tested per EOS/ESD S11.11. The materials also conform to the static decay requirement of FTM-101B, Method 4046.1 dissipating a 5000 Volt charge to 0 when grounded in less than 2 seconds.

ESD Brush handle--- polypropylene material
Bristle---Nylon

It has a surface resistance greater than or equal to 1.0*10^4 ohms but less than 1.0*10^9 ohms or surface resistivity greater than or equal to 1.0*10^8 ohms/square but less than 1.0*10^9 ohms/square. The static decay rate from 5000 Volts to 0 is less than 2 seconds, and it has a useful temperature range of 400 - 225o F, with intermittent use recommended at the higher end of the temperature range. Electrical properties are affected by humidity.
 
Only part of our brushes are showed here.

A1 bent handle brush,S,Bristle:3 rows 20 holes,Length 170mm
A2 bent handle brush,M,Bristle:3 rows 20 holes,Length 175mm
A3 bent handle brush,L,Bristle:2 rows 22 holes,Length 170mm
A4,bent handle brush,XL,Bristle:3 rows 34 holes,Length 225mm
 
B1,straight handle brush,S,Bristle:1 row 7 holes,Length 140mm
B2,straight handle brush,M,Bristle:1 row 9 holes,Length 140mm
B3,straight handle brush,L,Bristle:1 row 12 holes,Length 170mm

C1,straight handle brush,M,Bristle:1 row 17 holes,Length 255mm
C2,straight handle brush,L,Bristle:1 row 33 holes,Length 390mm

D1,U shape brush,S,Bristle:5 rows 50 holes,Length 95mm
D2,U shape brush,M,Bristle:7 rows 98 holes,Length 120mm
D3,U shape brush,L,Bristle:8 rows 160 holes,Length 180mm

E,3 holes straight handle brush,Bristle:1 row 3 holes,Length 155mm

F1,round handle brush,S,Bristle:1 row 7 holes,Length 120mm
F2,round handle brush,M,Bristle:2 rows 11 holes,Length 150mm
F3,pen brush,1 row,Length 142mm
F4,pen brush,1 row,Length 140mm

Tel: 86-755-29075495/29765455
Fax: 86-755-29075496  
Skype: elestech-sales
Trade manager: cneles () 

Shenzhen Eles Technology Co., Ltd

Eles Industrial Co., Ltd

Address:  F/5,Tower D, Hongtaifu Bldg. No. 514, Jianan 1st Rd.,
                Block 34, Baoan, Shenzhen, 518133, Gunagdong, China,
                Zip:518133