Electro Fusion Girth-Welding Joint
Negotiable /Piece
Min.Order:20 Pieces
Electro Fusion Girth-Welding Joint
Introduction |
It is a kind of special-purpose pipe connection, which is made by embedding specific electric heating melt welding wire in the basis of high quality PE sheet with special technicals. |
Aplication Scope |
1.District heating system(pipe),district thermal heating; 8. Used for joint of Pre-insulated Pipeline, HDPE double-wall corrugated pipes.
|
Advantages |
1. Waterproof; 2. Able to withstand axial forces initiated by axial moments of the pipe in the ground; 3. Able to withstand radial forces and bending forces; 4. Able to withstand effects of temperature and temperature variatations. 5. Have the same thickness of the pipeline insulation layer. 6. Perfect product instead of Heat Shrinkable Sleeve. |
Specifications |
Pipeline size: from Ø 108 to Ø 1760mm Wrap Thickness: 4mm—12mm Sleeves width:100mm,150mm,200mm,300mm,450mm, 500mm,600mm,700mm,800mm |
TEST REPORT
Standard by EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997 | |||
Testing program | Required technical | Test Result | Result |
Raw Material Density | ≥0.935g/m3 | 0.961 | Pass |
Melt Flow Rate | ≤0.50g/10min | 0.46 | Pass |
Appearance | Both surfaces are clean and free from other defects. | Pass | Pass |
Heat Reversion | ≤3%;shall not show any cracks | 0.89,No cracks | Pass |
Tensile strength | ≥19Mpa | 20.2Mpa | Pass |
Break Elongation | ≥350 | 672 | Pass |
Stress crack resistance | ≥300 | Pass | Pass |
Hydraulic pressure test | 20°C,0.1Mpa water pressure, no damage and leakage after 1 hour | Pass | Pass |
Air leakage test | 20°C,0.1Mpa air pressure,no damage and leakage after 1 hour | Pass | Pass |