Specifications

automatic pet bottle blow moulding machine
Stable performance with advanced PLC
Conveying preforms automatically with conve

automatic pet bottle blow moulding machine

YZ-6 FULLY AUTOMATIC BOTTLE BLOWING MACHINE.

Features:

Stable performance with advanced PLC 
Conveying preforms automatically with conveyor 
Strong clamping force with high

Procedure:

Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.

Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.

Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.

Step 4. The finished bottle is taken off by automatic discharging system

 Paramters,

 

ITEMS	UNIT	YZ6
No. OF MOULD	SET	6
WORKING PRESSURE	Bar	7-8
AIR BLOWING PRESSURE	Bar	30
HEIGHT OF BOTTLE	mm	330
STROKE OF MOULD OPENING	mm	130
THICKNESS OF MOULD	mm	190
HEAT UNIT GROUP	Group	4
HEATED-LIGHT LAYER	Layer	9
MAX. HEAT POWER	kw	35
VOLTAGE	V	220-380
FREQUENCY	Hz	50/60
PREFORM LENGTH	mm	≤180
BITTLE NECK DIAMETER	mm	20-28
BOTTLE DIAMETER RANGE	mm	20-115
PREFORM RAW MATERIAL	kg	PET
VOLUME RANGE	Layer	0.2-2.25
CAPACITY FOR MINERAL BOTTLE	Pcs/h	7500
WEIGHT	kg	≤5800
DIMENSION OF MAIN MACHINE	cm	310*231*198
DIMENSION OF HEATER	mm	It is the section of the main machine and contained it.
PREFORM-TIDIED MACHINE SIZE	mm
DIMENSION OF ELECTRICAL BOX	mm