Plastic production line/machine for UPVC CPVC pipe
Negotiable /Set
Min.Order:1 Set
GF series plastic pipe production line is mainly used in the manufacture of the plastic PVC pipes
with various tube diameters and wall thickness these pipes are used in the
agriculture ,constructional plumbing ,and cable laying etc.this set is composed of the conical
twin-screw extruder ,vacuum forming tank haul-off ,cutter ,and turned rack .the screw extruder
and the extractor adopt the imported AC frequency control device .the vacuum pump and the
electric vehicle motor both adopt the superior goods .the prime mover has the traction modes such
as two claw ,three claw ,four claw ,six claw and so on .The saw blade cutting type or the has
performance and high production efficiency .our company can allocate the special installation for
the inner wall spiral coil and core blister tube set according to the client requirements.
Main Technical Parameter
TUbe unit spcification &mode | GF125 | GF160 | GF250 | GF500 | GF630 |
MAX pipe diam(MM) | 125 | 160 | 250 | 500 | 630 |
Auliliary total power(kw) | 13 | 14 | 19 | 27.5 | 35 |
Cooling water capacity | 3 | 6 | 6 | 9 | 12 |
Compressed air pressure (Mpa) | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 |