Specifications

2014 new aluminum extrusion profile shell for car amplifier
1.Directly factory
2. OEM

 

 

   good qualtity battery aluminum extrusion shell

 

Alloy	6061,6063,6063B,6060,6005,6N01
Sample	Free !!
MOQ	0.5Ton
Temper	T5-T6
Surface Treatment	1) Mill finish 2) Polish 3) Anodizing: silver,  light bronze, dark bronze, champagne, black; etc 4) Powder coating: any color as the sample shows
Deep Processing	Cutting ,drilling, punching ,bending etc
Hardness parameter	1)6063:10-12HW 2)6061:14-16HW
Mould processing	make drawing-add material -lathe-drilling-milling-polish-treatment for heat resistance- wire cutting-electrical spark -assemble mould
Color	Silver white, black, golden, champagne, dark bronze or according to our requirement
Shape	Square, Round, Flat, or according to your drawing
Packing Details	1.       EP paper inside for each separate then craft paper outside 2.       EP paper inside for each separate then carton paper then pallet 3.       wooden carton
Delivery	15 days after receiving down payment or according to your requirement

 

2. Table of Chemical Composition of   good qualtity battery aluminum extrusion shell

 

Alloy	Si	Mg	Fe	Cu	Mn	Zn	Cr	Ti	Impurity		AL
									Unit	Total
6063	0.2-0.6	045-0.9	<0.35	<0.1	<0.1	≤0.1	<0.1	<0.1	<0.05	<0.15	Surplus
6061	0.4-0.6	0.8-1.2	<0.7	0.15-0.4	<0.15	<0.25	0.04-0.35	<0.15	<0.05	<0.15
6060	0.3-0.6	0.35-0.6	0.1-0.3	≤0.1	≤0.1	≤0.15	≤0.05	<0.1	<0.05	<0.15

 

 

4.Production Process of  good qualtity battery aluminum extrusion shell

 

 

 

  3. application  good qualtity battery aluminum extrusion shell

1.  aluminum shell for the motor shell and the  motor heatsink shell case 

2. aluminum shell for GPRS GSM

3. aluminum shell for pneumatic air cylinder

4.aluminum shell for power supply/ battery

5. aluminum shell for vehical inverter

 

 

 

3. Picture of  good qualtity battery aluminum extrusion shell

 

 

 

Series products of good qualtity battery aluminum extrusion shell

 

 

 

 

 

 

 

 

 

1. Q: What’s your MOQ?

R: Usually the MOQ of each aluminum heatsink is 500kgs, but it will be different according to dimension of aluminum heatsink.

 

2. Q: How many kinds of products of aluminum you have?

R: Our main products are Mill finish, Powder Coating, Anodizing, Electrophoresis, Wood Grain transfer, Broken Bridge etc.

 

3. Q: Can you supply OEM services?

R: We can supply OEM services.

 

4. How about the mould cost (extrusion die charge)?

R: The mould cost will depend on the dimension of aluminum heatsink.

 

5. Q: Do the prices of all the colors are the same with same surface treatment?

R: No. About Powder coating, the bright-color will higher than white or gray. About the Anodizing, colorful will higher than silver, and black higher than colorful. 

 

6. Q: Which way you calculate the weight?

R: We can choose both theoretical weight and actual weight, base on the clients requirements.

 

 

 

 

 

5.   Certificates

 

 

 

 

 

 

 

 

 

                        

 

            Choose Shenyang Toshine, Never be wrong!!!