ELEGO online sell original sub ohm mod joyetech ego one
Negotiable /Set
Min.Order:10 Sets
Shenzhen Elego Technology Co., Ltd.
Superb taste and vapor! Genuine iJoy Acme Vape atomizer in stock
All Stainless steel construction! Genuine iJoy Acme Vape atomizer
All Stainless steel construction! Genuine iJoy Acme Vape tank
3.5ml liquid capacity! Authentic iJoy Acme Vape tank wholesale from Elego
Fully enclosed bottom! Authentic iJoy Acme Vape tank in stock
Fully enclosed bottom! Original iJoy Acme Vape vaporizer in stock
ELEGO online sell original sub ohm mod joyetech ego one
Skype: debbie.elego
Joyetech ego one/ego one xl Selling Points
1. The first Joyetech product of 2015
2. The one device for everyone.
3. Cloud vapor (vapor as large as RBA)
4. High-magnification battery, also compatiable with Sub Ohm Atomizers.
5. Excellent Adjustable Airflow.
6. Passthrough battery, enjoy vaping while recharing.
Joyetech ego one/ ego one xl Packing List
1× eGo One battery 1100mAh/2200mah
1× eGo One 1.8ml/2.5ml Atomizer with Metal Mouthpiece(1.0ohm)
1× eGo One Mouthpiece (PMMA)
1× Atomizer Head( 0.5ohm)
1× USB Cable
1× 1A wall adaptor
1× Manual
Joyetech ego one/ego one xl Specification
1. Thread: 510
2. Battery: 1100mah/2200 mAh
3. Size: 19mm*104.5mm /19mm*142mm
4. Battery Size: 19mm*58.6mm /19mm*85mm
5. Atomizer Sizer: 19mm*50.3mm /19mm*61.5mm
6. Liquid capacity: 1.8ml/ 2.5ml
7. Coil: 0.5ohm/1.0ohm
Joyetech ego one/ego one xl Battery
1. ON/OFF: Press the button for 5 times in 2 seconds to switch between on and off mode.
2. 15 Seconds Cut Off: If the power button is pressed for 15 seconds or longer, the eGo ONE will stop working until the button is released and pressed again.
3. Check Atomizer: When no atomizer connected to the battery, press the power button, the LED indicator flashes white, and no output current.
4. Charging:
a. Plug the USB into the supplied wall charger or computer.
b. When charging, the LED indicator stays red.
c. When the battery is fully charged, the red indicator go off automatically.
Joyetech ego one Atomizer
1. Hold the Atomizer with the 510 connection end up.
2. Unscrew the cap below the connector base.
3. Inject Liquid slowly against the inner wall of the tank. Do not over fill 2.5ml.
4. Tighten the tank until firmly in place.