5Nm3/H Hydrogen Generation Equipment For Steel Mill
The company mainly engaged in water electrolysis hydrogen production equipment and gas treatment equipment research,design,development and marketing.The company developed a new high-end technology based, to provide first class water electrolysis hydrogen production system of products and service for all the world.
Scope:
1.2Nm3/h-1000Nm3/h pressure type water electrolysis hydrogen production device
2.hydrogen,oxygen purification devices
3.hydrogen purification devices recovered
4.the drying device of generator-specific hydrogen
5.the pressure recovery of chlor-alkali hydrogen purification devices
6.Steel hydrogen recovery devices, pure water devices
The “intelligent control of electricity device” and the “nonpower water feed system” of Hydrogen making equipment, as well as the “end gas retrieve system” of the purification equipment were researched and developed by ourselves. The inventions filled the domestic technology blank. On basis of the traditional DQ series and CHE, SDQ series with 36 models have been launched to meet various demands of the market and produced many favorable comment from the clients.
Hydrogen Making Flowchart Process
Water in the electrolytic is broken down into hydrogen and oxygen, were followed into hydrogen and oxygen gasliquid separator for separation.KOH solution into circulation pump to obtain circulatory, cooling by the cooler, remove impurities through filter and returned to the electrolysis tank to maintain the continuous electrolysis process works. Hydrogen and oxygen in the separator, after washing,condensation,remove water, the process control system after occurrence of hydrogen send to further purification device.
CHE Series Hydrogen Generator
This series was developed basing on SDQ series, including CHE-2500(Hydrogen output 2.5Nm3/h),CHE-5000,CHE-10000,CHE-20000.
The advantages of CHE Hydrogen generator as follows:
1. Smaller size: total area is less than 10m2
2. Easier installation
3. Higher standard hydrogen:99.999% purity
4. Higher degree of automation
Technical Parameters of CHE Hydrogen Generator
Model | CHE-2500 | CHE-5000 | CHE-10000 | CHE-20000 |
Hydrogen Output(Nm3/h) | 2.5 | 5 | 10 | 20 |
Oxygen Output(Nm3/h) | 1.25 | 2.5 | 5 | 10 |
Output Pressure(Mpa) | 0.8-3.2 adjustable | 0.8-3.2 adjustable | 0.8-3.2 adjustable | 0.8-3.2 adjustable |
Hydrogen Purity(≥%) | 99.999 | 99.999 | 99.999 | 99.999 |
Hydrogen-Dew Point(≤℃) | -75 | -75 | -75 | -75 |
Pure Water Consumption(≤kg/h) | 2.5 | 5 | 10 | 20 |
Pure Water Min Resistance(M-CM) | 0.2 | 0.2 | 0.2 | 0.2 |
Min Pure Water Pressure(Mpa) | 0.02 | 0.02 | 0.02 | 0.02 |
Cooling Water Consumption(≤m3/h) | 2 | 2.5 | 5.4 | 9.5 |
Cooling Water Pressure(≥Mpa) | 0.15 | 0.15 | 0.15 | 0.15 |
Cooling Water Pressure Down(≤Mpa) | 0.04 | 0.04 | 0.04 | 0.04 |
Power(Kw) | 15 | 30 | 60 | 120 |
Power Voltage(V) | AC 380 | AC 380 | AC 380 | AC 380 |
Direct Current Consumption(≤kwh/Nm3) | 4.6 | 4.6 | 4.6 | 4.6 |
Replacement of Gas Consumption(≤Nm3/time) | 0.2 | 0.2 | 0.3 | 0.5 |
Replacement Gas Pressure(≥Mpa) | 0.5 | 0.5 | 0.5 | 0.5 |
Generator Size(mm) | 1800*750*2000 | 1800*750*2000 | 1800*750*2000 | 2200*850*2000 |
Power Size(mm) | 1000*600*1200 | 1000*600*1200 | 1000*600*1200 | 1000*600*1200 |
Hydrogen Making Plant Workingsite:
Welcome to visit our factory and visit Hydrogen Making Equipment Workingsite.