Specifications

Hand dryer jet
1.Water accepting tank
2.Dual Switch(cold and hot wind)
3.Saving electricity
4.Engery saving

Hand dryer jet 

 

 

Features:

Voltage	220V-240V~50Hz   110V-120V/60Hz
Rated Power	1650W
Current	6.5A(220V)/7.5A(110V)
Motor type	Brushless Motor
Air speed	100m/s
Water Splash Proof	IP*1
Dimension	W300*D220*H687mm
Color	White/Blue
Matetial	ABS plastic
Carton Size	735*335*255mm   1pcs/ctn

 

 

Function:

 1.Infrared Sensor Design:
The unit's"Infrared Sensor Design"makes sure your hands don't come into contact with any surface when drying;
2.Antimicrobial & Nonflammable Material:
The hand drying area, drain tank, and even drain hose have all been antimicrobial treated for better sanitation,the nonflammable material avoid any accidents.
3.Self Protect System
A.Self protection-To prevent overusing the unit,the built-in timer will stop the unit after 25 seconds. To continuous use, draw back your hands and put them in again.

B.Current protection-If the current is overrun the unit will stop working until the malfunction is eliminated.
C.Temperature protection- If any key part is not in good condition because of the high Temperature around the unit will stop working until the malfunction is eliminated.
D.Short circuits protection-The control system will stop working once short circuit happens.
E. Electromotor protection- If the electromotor or the fans can't work because of sundries the control system will stop working until the malfunction is eliminated.

 

4.Sanitary: The hand drying area,drain tank,and even drain hose have all been antimicrobially treated for better sanitation. Alcohol-resistant resin used for the hand drying area allowing cleaning with alcohol.