Foil Air Bubble Foil Insulation
(Air Bubble Insulation, Reflective house wrap, Roof Insulation Foil)
What’s NUVOLATM Bubble Foil Insulation?
Product introduction
NUVOLA Foil Bubble Insulation has 5 layers. Aluminum foil+ PE+ bubble+ PE+ Aluminum foil. It is multi-layers of obstruction material.
This item consists of PET / AL / XPE (EPE) etc. multi- layers of obstruction material. It is an environment friendly product which has good heat preservation and insulation properties. The outer layer of PET provides excellent abrading and tears resistance. The middle layer of AL / XPE shows strong ability in barrier of moisture and oxygen, reduction and insulation of sound. The middle layer also has the advantages like reflecting light and heat and stopping the penetration of ultraviolet radiation.
Features
- No harmful material.
- Light weight, shock and sound absorption, noise reduction.
- Environtmental protection.
- Waterproof, flame retardant.
- Heat resistance, low temperature resistance.
- Chemical resistance, ageing resitance.
- Not easily broken.
Range Of Application
- Building reflection heat, cold and hot water pipe insulation.
- Refrigerator partition, central air conditioning, refrigerator and household appliances insulation.
- Insulations,sound-absorbing, noise reduction and moisture-proof insulation in the car, train, refgrigerator car, laboratory and other industries.
- Special product packing and refrigerated packing and so on.
Technical Data Sheet
TEST DESCRIPTION | TEST METHOD | UNIT | NUVOLA™ BUBBLE FOIL INSULATION | |
1 | Radiant Heat Reflectivity | ASTM C1371 | % | 97±2 |
2 | Emissivity | ASTM C1371 | % | 3±2 |
3 | Tensile Strength/Breaking Force Machine/Hprizontal Direction MD Cross/vertical Direction CD | ASTM D5035-95 | N/50mm N/50mm | 260.9 234.4 |
4 | Elongation Machine/Hprizontal Direction MD Cross/vertical Direction CD | ASTM D5035-95 | % % | 42.8 27.5 |
5 | Tear Strength/Tear Resistance Machine/Hprizontal Direction MD Cross/vertical Direction CD | ASTM D1004 | N N | 44.9 37.4 |
6 | Noise Reduction Conefficient | ASTM E-384 | % | 45 |
7 | Temperature Resistance 90 degrees for 24 hours | In-house | - | No-Delamination |
8 | Water Soak Test Full Immersion for 24 hours | In-house | - | No-Delamination |
Note: The above product data typical laboratory averages and are subject to change without prior notice | ||||
