Double Sided Heat Transfer Adhesive Acrylic Tape
USD $3.52 - $3.82 /Square Meter
Min.Order:67 Square Meters
Foshan Fuyin Adhesive Co., Ltd.
Product Description:
FuYin transfer tapes are manufacture by UV curing.The release liner are kraft paper,glassine paper and PET.(PET release liner is for die-cutting in clear room and good die-cuttability).The important physical properties of FY-VHB transfer tape is high temperature and humidity resistance.The standard thickness is 0.05mm and 0.13mm.We also provide different reguest.The standard size is 1000mm*55m(we can supply other size on customer request).
Transfer tape without solvent:does not contain solven such as toluene,hexan etc.
3M™ VHB™ Adhesive Transfer Tapes F9460PC, F9469PC and F9473PC utilize the 3M™ High Performance Acrylic Adhesive 100MP, which has excellent long term holding power with much higher adhesion strength than typical pressure sensitive adhesive systems. These 3M™ VHB™ Adhesive Transfer Tapes are transparent and are ideal for use in many interior and exterior industrial applications to replace rivets, spot welds, liquid adhesives, and other permanent fasteners.
Application:
Construction Information:
3M™ VHB™ Adhesive Transfer Tapes
Products F9460PC F9469PC F9473PC
Adhesive Thickness 0.002 in. 0.005 in. 0.010 in.
(0.05 mm) (0.13 mm) (0.26 mm)
Liner Material 58# polycoated Kraft
0.004 in. (0.10 mm)
Electrical and Thermal Properties:
Products 3M™ VHB™ Adhesive Transfer Tapes
F9460PC F9469PC F9473PC
Thermal Coefficient of Expansion 770 x 10-6 mm/mm/°C
Thermal Conductivity (ASTM C-177) 0.092 BTU-ft/ft2 Hr °F (0.0016 Watts/cm °C)
Dielectric Strength 23°C 125°C 175°C 23°C 125°C 175°C 23°C 125°C 175°C
(Volts per ASTM D-149-97A) 1200 1000 1000 3000 2600 1900 5500 N/A N/A
Insulation Resistance (ASTM D-1000) > 1 x 106 megaohms/in2
Density 0.04 lb/in3 (0.98 g/cm3)
Application Techniques:
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol/water mixture or heptane.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
Product Use:
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.
Features:
Application Techniques:
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm | |
application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the | |
adhesive in developing initmate contact with the bonding surface. | |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. | |
Some typical surface cleaning solvents are isopropyl alcohol or heptane.* | |
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape | |
application to surfaces at temperatures below 50°F (10°C) is not recommended because the | |
adhesive becomes too firm to adhere readily. However, once properly applied, low | |
temperature holding is generally satisfactory. | |
*Note: Carefully read and follow the manufacturer’s precautions and directions for use | |
when working with solvents. These cleaning recommendations may not be |
|
compliant with the rules of certain Air Quality Management Districts in |
|
California; consult applicable rules before use. |
|
Product Use:
All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
Other Products
Masking Tape 3M 467MP
Die Cutting
Certifications
Each roll packed with Poly bag / Blister card / Double blister in standard export cartons.
F: What is the size of the product you can supply?
A: Thickness: 0.5/0.8/1/1.5/2/3mm
Log roll size: 1020mm X 20/30/50/100M
Slit roll size: We can make the width down to 3mm
Custom size is welcomed
F : May I get samples?
A : Yes,of course.
A4 sheet or width less 10mm roll sample is free,customer only pay the freight cost.
F : How about the price?
A :PE foam tape manufacturer,best quality with relative competitive price.
Also supply different class product,you can compare and choose.
F : What is your MOQ?
A : 100 Square meter,or you tell us the size you need,then we calculate the MOQ for you.
F:What should we pay attention to when used it?
A: Tell us your application,then we can give you the professional guidance.