Product Details

PVC tape is made by one side or both side coating pressure senstive adhesive on PVC. The tape provide high bond strength to most surfaces.

Product Description:

White PVC tape coated with rubber adhesive

Interior usage
High tack adhesive

Features:

Resistant to moisture, acids, alkalis, oils and other chemicals
Performs well over a wide range of environmental conditions
Conforms well to corners and irregular surfaces
Color matched specifically for PVC

Application:

Adhereto posters,photo,envelopes.
Shoe and leather industry.
For reinforced bonding.
Fixing of omament,hook or signboard etc.
To reinforce gament and laminate nameplate.

Features:

•	These tapes have a moisture resistant polycoated kraft liner which can withstand high
	humidity conditions with minimal cockling or wrinkling.
•	These tapes have a film carrier which can add dimensional stability to foams and other
	substrates and also makes it easier to handle the tape during slitting and die-cutting.
•	3M™ Double Coated Tape 9474LE features a dual liner for ease in selective die cutting.
• The bond strength of 3M™ Adhesive 300LSE increases as a function of time and
	temperature, and has very high initial adhesion.

Application Techniques:

Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm
application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the
adhesive in developing initmate contact with the bonding surface.
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified.
Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape
application to surfaces at temperatures below 50°F (10°C) is not recommended because the
adhesive becomes too firm to adhere readily. However, once properly applied, low
temperature holding is generally satisfactory.
*Note: Carefully read and follow the manufacturer’s precautions and directions for use
when working with solvents. These cleaning recommendations may not be
compliant with the rules of certain Air Quality Management Districts in
California; consult applicable rules before use.

Product Use:

All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

Other Products