GH-191B Newest green friendly Solar Animal Repeller Pest Control

1.Instruction: 

 Button "SENS" (Left): Is for adjusting sensitivity and distance. By turning the knob clockwise, you increase the range of protection. To repel small animals, turn the knob up to the right.
- Button "FREQ" (Right): Frequency control. By turning the knob clockwise, you increase the frequency.

Button "FREQ" Position:

- 0: OFF

- 1: 13.5KHz-17.5 kHz Repels animals such as mice, small rodents, ...

- 2: 15.5KHz -19,5 KHz Repels animals such as large dogs, foxes ...

- 3: 19.5 KHz -23.5KHz Repels animals such as small dogs, cat, bird ...

- 4: Strong flashing    

- 5: All functions working, sweep frequency from mode 1 -- mode 2 -- mode 3, and turn on strong flashing.

3.Install:      

1. Remove the battery compartment on the back; Install 3x AA size rechargeable batteries, and then close the battery compartment. (battery included, so do not need this)
2. Place the unit pointed towards the area that you want to protect (for example, in the flowerbed or against the wall etc.)
3. Remember to choose a place where the solar panel of the top can get as long time sunshine as possible. And avoid
4. If you mount the unit in the ground, insert the spike into the ground carefully. (See Figure 1 to connect the pole sections.) Please leave the spike 12cm or more above the ground. (see Figure 2)It is suggested that you dig a hole and then insert the unit to ensure no damage occurs.
5. The item can be inserted in the ground, or mounted against the wall, or put the top part directly on the flat surface.