Wide angel pir ceiling sensor switch , adjust distance and time

Wide angel pir ceiling sensor switch , adjust distance and time

USD $4 - $5 /Piece

Min.Order:100 Pieces

Supply Ability:
100000 Piece / Pieces per Month
Port:
shenzhen
Payment Terms:
T/T Credit Card

Quick Details View All >

Place of Origin:
Guangdong, China
Brand Name:
senba
Model Number:
AS0012
Max. Current:
3A
Max. Voltage:
220V

Nanyang Senba Optical Electronic Co., Ltd.

Business Type: Manufacturer
Shenzhen Guangdong China
Main Products: PIR Sensor ,LDR ,module ,light Sensor ,LCR

Product Details

Specifications

light switch with pir
on celling 360 degree:
round cover high sensitve
load power 800W
consumption less than 0.02W

light switch with pir

 

Intelligent infrared sensor switch is pyroelectric infrared sensors, daylight detection sensor, High sensitivity and

reliability.This switch is especially suitable for classrooms, schools, libraries, offices, hospitals, computer room,

meeting rooms and other public places.

 

light switch with pir Features:

1.auto-sensing, entering the region, the lights, leaves auto delay off.

2.during each effective, human activities will cause a delay sensing switch automatically extended time period.

3.Adjustable light intensity: adjustable CDS.

4.Delaytime adjustable.

 

light switch with pir Technical parameters:

1.Operating voltage: 110VAC or 220VAC.

2.sensing distance: the largest mounted side wall 7 meters (adjustable).

3.Load type: fluorescent, LED energy saving lamps, all kinds of lamps.

4.Power consumption: < 0.25W

5.Load power: < 600W

6.Detection angle:110 --- 140 degrees

7.Open the light intensity setting range :1-250LUX (adjustable)

8.Output Delay: 30 seconds --- 30 minute (adjustable)

9.Ambient temperature: -10 ~ +50 °C

10.Product Size: φ95 × 35mm

11.Contact the working life: 50 million

 

Wide angel pir ceiling sensor switch , adjust distance and timeWide angel pir ceiling sensor switch , adjust distance and time

light switch with pir Instructions for use:

 

1. according diagram connected switch, power warm-up time about 2 minutes. After warm-up, the switch enter

normal operation. When daylights, the switch automatically closed.

 

light switch with pir Use Note:

 

1.Wiring installation shall not be charged, non-load short-circuit, to be installed after the power.

2.Strict accordance with the wiring diagram wiring, if a wrong can damage the switch, resulting in power line fault.

3.Prohibited use of super-power range, otherwise it will burn switch.

4.Installation environment: switch installation location as possible from the load is greater than 1 meter, not the

switch installed in direct sunlight or air flow areas. Switch can not be placed where there are high-power radio

frequency radiation (example: radio, radio, the antenna).

Contact Supplier

Ms. Jane Zhang manager Chat Now
Telephone
86-755-82594732
Mobile
13823515565
Fax
86-755-82594727
Address
No.4 Building, Huawan Industry Area,BaoAn,ShenZhen,China Shenzhen,Guangdong

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Electrical Equipment & Supplies > Switches > Other Switches
Categories
Hi~