Product Details

underground plastic HDPE gas pipe for natural gas supply and oil

HDPE Gas Pipe Features:

1.Pressure Rating: SDR17.6 PN<=6 SDR11 PN<=10

2.Size: from 20mm to 1200mm available

3.Standard: GB15558.1-2003

4.Colors: Yellow, Black with yellow stripes, other colors available on request

5.Standard: ISO4427 EN12201 ASTMD714 AS4130 GB/T13663

6.Certification: ISO9001, CE certification.

HDPE Gas Pipe Applications:

1.PE gas pipe is suitable for gas transportation on condition that working temperature is among -20°c~40°c

2.Long-term maximum working pressure is not more than 0.7MPa.

3.Polyethylene Gas Pipe is suitable for Gas distribution network both for domestic & industrial consumption.

HDPE Gas Pipe Advantages:

1.Non-toxic, health:PE pipe material non-toxic, tasteless, through the strict health monitoring,

it belongs to green building materials, never scaling, which can effectively improve the water quality.

2.Corrosion resistance:PE belongs to inert materials, can resistance to various chemical media.

3.No leakage:PE pipe is connected by electric melting, its interface strength higher than tube itself .

4.High toughness:fracture extension rate of PE pipe,commonly more than 500%.As to the uneven settlement of the base, its adaptive ability is very strong, good aseismic performance.

5.Excellent resistance to quickly crack propagation (RCP) ability.

6.Excellent flexible and resistance to scratches ability.

7.Good wear resistance, low wall friction coefficient, small flow resistance, excellent conveying ability.

8.Can use a variety of trench less ways, great convenient for construction and installation.

9.Low system cost, less maintenance costs, can dramatically reduce the cost for the project.

10.Long service life: dark bury PE pipe normal uses more than five years.11.PE material can be reused, complete with the concept of efficient environmental protection which our

state advocates .

11. Appearance: Yellow stripes

HDPE Gas Pipe with Gas Pipe Fittings

Standard: ISO-4427, DIN 8074, ASTM D3035, BS-6437, GB/T13663-2000

Technical requirements of the PE gas supply pipes:

Items	technical requirements
Appearance	Outside and inner pipe surfaces shall be clean and smooth. Deficiencies including bubbles, obvious scratches, surface sinking, impurity and uneven colors are not allowed. Pipe ends shall be cut flat and keep vertical to the axis line.
Thermal stability(200°C).min	greater than 20
Elongation at break. %	greater than or equal to 350
Vertical retraction(110°C), %	less than 3
Melt Flow Rate(MFR). (190°C.5kg)g/10 min	MFR rate of change less than 20%
Hydrostatic strength (MPa)	PE80	(1). 20°C. Hoop stress 9.0MPa,time to rapture≥100h (2). 80°C. Hoop stress 4.5MPa,time to rapture≥165h (3). 80°C. Hoop stress 4.0MPa,time to rapture≥1,000h
	PE100	(1). 20°C. Hoop stress 12.4MPa,time to rapture≥100h (2). 80°C. Hoop stress 5.4MPa,time to rapture≥165h (3). 80°C. Hoop stress 5.0MPa,time to rapture≥1,000h