Induction Heating Machine 4-10 KW from China supplier induction heater for welding brazing
USD $999 - $19,999 /Set
Min.Order:1 Set
Shenzhen Dongda Industrial Co., Ltd.
Induction Heating Machine 4-10 KW from China supplier
Features
Fast Heating: The minimum rate of heating is less than one second(rate of heating is available for adjustment and control)
Wide coverage of heating: It can be used to heat various metal parts (replace removable induction coil as per different shape).
Easy Installation: It can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.
Easy operation: You can learn to operate it within several minutes.
Fast start-up: It can be started to perform heating operation on condition that water and power supply is available.
Low Power Consumption: As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%. The smaller the size of the work pieces, the lower power consumption would be.
High Effectiveness: It has such features as uniform heating ( it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of work piece ), fast warming and limited oxic horizon, and can gurad against any waste after annealing.
Comprehensive protection: It has such functions as overvoltage, over-current, overheat and water shortage alarm indications as well as automatic control and protection.
Controllable Temperature: It is applicable to control the temperature for heating work pieces as per the preset heating time, and thereby control the heating temperature at a certain technical point.
Comprehensive full load design: It can work continuously for 24 hours
Small size and light weight: It has a weight of only several dozens of kilograms, of which, the limited floor space can effectively save the workshop space.
Input Amperes at Rated Output | 220V:23A |
Thermal conversion efficiency | More than 90% |
Cooling Mode | Water cooled |
Input Power | 220V Single Phase,50-60HZ |
Digital Recorder | Optional |
Control Model | Digital Control |
Resonance | Series Resonance |
Temperature | Max 1800 °C |
Dimensions | H:500MM W:200MM D:450MM |
Weight | 30 KG |
Transportation | By sea or By Air |
Warranty | 1 year |
Applicant | Heating Welding Annealing Heat treatment |
Applicants
Heat treatment: Hardening, annealing, tempering of auto parts, motorcycles, hardware tools, gears, sprockets, pneumatic, hydraulic accessories.
Hot forming: Diathermy of small workpiece, hot forging and hot rolling of twist drill.
Welding: The welding of turning/woodworking tools, drill bits, serrated blade, steel, copper wall, similar metal.
Metal melting: (Vacuum) molding, casting molding and evaporation coating of gold, silver, Fe, Al and other metals.
Other applications: The production of semiconductor single crystal, with hot, bottle sealing, sealing toothpaste, powder coating, metal embedded in plastic and so on.
Our service
1.Before sales
Our professional technical recommend the right machine, and can support customized special machine per customer’s requirement and special parts.
2.Sales following
During machine production, keep checking the machine quality and testing machine. We will take pictures for customer checking.
3.After Sales for Overseas customer
One year warranty;
Long-term technical service;
Overseas on-site technicians service if required.
FAQ
1. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.
2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.
3.How to install your machine?
We have paper installation instructions and videos, we will teach till you learn it.
4. Which export port you use?
Any China port, commonly we will use Shenzhen ,Guangzhou ,Hongkong port, it can appoint as you like.
5.How about the payment terms and delivery time ?
Payment terms for small machines: 100% T/T/ Western Union/Cash in advance.
The big machines and big amount: 30% deposit,70% before shipment (we will shoot total delivering process for customer's confirmation)and the related papers.You can pay by T/T,L/C, Western Union or other ways.
The small machine delivery time is within 7 days, the bigger one takes about 15days,we will delivery goods on time.
6.If I have paid but can not receive the goods, how should I do?
Alibaba international website is a famous trade platform and has been mature those
years,every supplier on it has paid large integrity fund,and we have Chinese business licenses which can be checked on China official website or we can show it to you,so that situation will never appear, please be assured.
7.Is your goods has ISO9001 or CE certificate ?
Yes,all our goods has ISO and CE certificate. All machines are high quality goods.
8.What is your nature of your company:dealer or factory ?
We are manufacturer and have a big factory ,warmly welcome to visit our factory and contact us.
Skype :vivianwei2014 whatsapp:+8615919475687
Tel: 0755-27986108