Used heat treatment furnace
USD $1,200 - $12,000 /Set
Min.Order:1 Set
Shenzhen Dongda Industrial Co., Ltd.
Used heat treatment furnace
1.Induction billet heating
2.IGBT technology;
3.Energy saving,
4.High efficiency;
5.Environment friendly
Used heat treatment furnace
Technical Parameter:
Models | DDZP-15 | DDZP-25 | DDZP-35 | DDZP-45 | DDZP-70 | DDZP-90 | DDZP-110 | DDZP-160 |
Fixed Power Input | 15KW | 25KW | 35KW | 45KW | 70KW | 90KW | 110KW | 160KW |
Output Voltage | 70-520V | 70-550V | 70-550V | 70-550V | 70-550V | 70-550V | 70-550V | 70-550V |
Input Power Source | Three Phases 380V±20% 50-60HZ | |||||||
Output Oscillating Frequency | 1KHZ-20KHZ It's made based on customer's requirement of parts heat treatment | |||||||
Duty Cycle | 100% full load,24 hours of continuous work | |||||||
Weight | 24KG | 24KG | 34KG | 36KG | 51KG | 57KG | 89KG | 130 KG |
Volume(CM) | 29(W)×47(H)×48(L) | 29×47×54 | 37×57×67 | 42×89×77 | ||||
others | For normal products,it's made of normal panel,but can make automatice ones with time PCB function.PCB panel function includes:heating time:0.1-99.9 seconds;retain time:0.1-99.9 seconds. |
Used heat treatment furnace
Main application:
Medium frequency machines are usually used in the penetration heating occasions, For example,
(1)Rod heating for forging
(2)Melting of almost all kinds of metals
(3)Heating of stators or rotors for fitting
(4)Heating of tube end for extrusion
(5)Heating of moulds
(6)Deep quenching of shafts gears
(7)Tempering or Preheating of weld-joint etc.
Used heat treatment furnace
Advantages applications of models with Timer function:
1. Heating power, retaining power, heating time, retaining time can be preset adjusted, this makes it possible to control the heating curve heating time.
2. It is suitable to use in the repeated heating or high speed heating of small parts;
3. By presetting the timer the power of the generator, retaining can be realized to a certain extent
Used heat treatment furnace
Pictures