Specifications

1. USD6450-USD15,354per set
2. IGBT module, MOSFET pipe
3. Automatic tracking adaptabilty
4. Adjustable power, Freq

Aluminum melting smelter

high frequency induction Metal smelter DD-70

 

 

1. Adopts the latest MOSFET, IGBT power units and frequency conversion control techniques with high efficiency, low energy consumption and higher output power.

 

2. With constant current and constant power control function to greatly optimize the heating process of metals, realize efficient and fast heating, and fully exert the superiority of the products.

 

3. Power consumption is half of traditional electron tube high frequency induction heating equipments under the same conditions.

 

4. With 100% load design, can work for continuous 24-hour a day. Infrared temperature detector can be equipped to realize the automatic control of temperature, improve heating quality and simplify manual operation.

 

5. With heating-insulating cooling three stages function setting, the heating and insulating time required can be get to accommodate to the batch and repeated heating situations.

 

6. With multiple status display of overflow, over voltage, low water, phase failure and load malfunction, providing higher reliability and sustainability.

 

7. Select power supply according to the power and frequency. The higher the frequency, the shallower the heating depth, and

the lower the frequency, the better the diathermancy.

 

It's mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:

 

1. Quench for various hardware and tools, such as pliers, wrench, hammer, ax, screwing tools and shear (orchard shear).

2. Quench for various automobile and motorcycle fittings, such as crankshaft, connection rod, pinton pin, chain wheel, aluminum wheel, valve, rock arm shaft, small shaft and fork.

3. Various electric tools, such as axes and gear.

4. Quench for machine tools, such as lache deck and guide rail.

5. Quench for various hardware metal parts and machined parts, such as shaft gear (chain wheel) cam, chuck and clamp. Etc.

6. Quench for hardware molds, such as small size mold, mold accessory and inner hole of mold

 

Annealing (tempering and modulation)

 

1. Annealing of various stainless steel products, such as stainless steel basin, annealed and extruded can, annealed folded edge, annealed sink, stainless steel tube, tableware and cup.

2.Annealing of various other metal work pieces, such as golf ball head, cue, brass lock, hardware copper fitting, kitchen knife handle, blade, aluminum pan, aluminum pail, aluminum radiator and various aluminum products

 

 

The table below lists the main models recommended maximum melting abilities. About 50 to 60 minutes are needed to finish one melting process at cool status of the furnace, at hot status of the furnace, only 20 to 30 minutes are needed.
Main Models Application

 

 

 

Maximum melting capacity one time

 

 

 

 

 

Models	Maximum melting capacity of ferrous metal	Maximum melting capacity of alumnium	Maximum melting capacity of copper,gold,silver bronze
DDZP-15 15KW Furnace	4Kg	3Kg	10Kg
DDZP-25 25KW Furnace	8Kg	6Kg	20Kg
DDZP-35 35KW Furnace	12Kg	12Kg	40Kg
DDZP-45 45KW Furnace	18Kg	21Kg	70Kg
DDZP-70 70KW Furnace	28Kg	30Kg	100Kg
DDZP-90 90KW Furnace	45Kg	40Kg	120Kg
DDZP-110 110KW Furnace	60Kg	50Kg	150Kg
DDZP-160 160KW Furnace	100Kg	75Kg	250Kg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

...