Specifications

Rechargeable high brightness solar lantern light
1.DC Solar 6V/1.5W
2.USB Socket
3.4 light modes
4.CE ROHS Approved

Rechargeable high brightness solar lantern light   

 

Solar Panel: 1.5W/6V Poly Solar Panel

Battery: 4V/4000Ma Lead Acid Battery

Light source: 1W x 1 piece super high brightness white LED

Hours of light with full battery:

4 light Modes:

Bedlight: at least 100 hours

low: at least 12 hours

Medium: at least 6 hours

High: at least 4 hours

Input : Sunlight or DC

Output : Can charge mobile phone by USB

 

 

Led emergency light solar  Features &usage

 

Ideal for camping, cooking, actitiies indoors & outdoors  

Other functions: chargeable by 220/110V voltage with AC/DC adapter

Charging time: 4 hours by AC/DC adaptor and 9 hours by Solar.

New : with USB for charging mobile phone

With overcharge and discharge protections

LED bttery capacity indicator

 

 

 

 

Led emergency light solar  photos:

 

 

 

 

 

 

 

         

WARNING
Please read these instructions before using, and keep for future reference.
1. Please insure that the battery has been fully charged before using, and charge it in time if
the light is dim.
2. Charge the unit regularly, to insure the best performance of the portable lamp.
3. The power will reduce when the lamp is used at temperature under 0 C or above 40 C.
4. Do not disassemble the lamp unless you are a certified technician.

OPERATING INSTRUCTIONS
1. Put the outer solar panels at a sunny place, make sure solar panel is not blocked by
anything.
2. AC mains adaptor is an optional accessory. When the unit is charged by AC mains
adaptor, the charger should be inserted into the "DCIN", and plug in AC power. During
charging process, LED is red; when charging is finished, LED turns to green. It is normal
that the charger may be a bit hot while charging.
3. There are four modes: Mode 1 (pressing switch once) is 25% brightness; Mode 2
(pressing switch twice) is 50% brightness; Mode 3 (pressing switch three times) is 75%
brightness; Mode 4 (pressing switch four times) is maximum brightness.
Pressing switch five times will turn off the unit.
4. 4-head USB phone charger is used to charge cell phones, only charge for suitable cell
phones (Note: iPhone 5 cannot be charged by this unit.)
5. To use the reading lamp for reading, please connect the reading light to USB socket.

TECHNICAL PARAMETERS
1. Material: transparent plastic AS/ABS.
2. Battery: Valve non-maintained lead acid battery, 4V, 4AH.
3. Lamp: 1W high brightness LED.
4. Solar panel: 6V, 1.5W.
5. Charge time: 10 hours charged by AC current, or 22 hours charged by solar energy.
6. Illumination time: Mode 1: 20-25 hours; Mode 2: 15-20 hours; Mode 3: 13-15 hours; Mode
4: 10-12 hours.

MAINTENANCE
1. Use cotton cloth to wipe the outside surface of unit, do not use chemical solvent.
2. Only use the battery designated by the manufacturer.
3. Do not disassemble the unit unless you are a certified technician.