High quality insulation PVC heat shrinkable tube for wholesale
USD $0.01 - $5 /Meter
Min.Order:1000 Meters
Guangzhou Kaiheng K&S Co., Ltd.
KOSOO FPVC
Environment friendly, flexible, flame-retardant PVC tubing
Application
KOSOO FPVC is environment friendly, flexible, flame-retardant, irradiated crosslinking heat shrinkable PVC
tubing. Unlike other typical flame retarant tubings, FPVC is free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal
compounds, which are classified as environmentally hazardous substances. This high-reliability product is
widely used for insulation or jacketing of wire harness, strain relief of wire terminations and connections, bundling of wire harness, protection of soldered points, insulation and capsule of electronic components, anti-corrosive protection, identification and color coding, etc.
Features/Benefits
·Shrink ratio: 2:1.
·Very flexible, highly flame-retardant.
·Low shrink temperature.
·Good thermal stability.
·Excellent physical, chemical and electrical properties.
·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.
·Wide range of sizes and colors.
Operating Temperature Range
Operating temperature range: -55℃~105℃
Minimum shrink temperature: 70℃
Minimum full recovery temperature: 110℃
Specification values
| Property | Requirement | Test method |
Physical: | Tensile strength | 10.4MPa min. | ASTM D 638 |
| Elongation | 100% min. | ASTM D 638 |
| Heat shock 250℃, 4hrs | No cracking, dripping or flowing | ASTM D 2671 |
| Low temperature flexibility -55℃, 4hrs | No cracking | ASTM D 2671 |
Aging 136℃,168hrs |
|
| |
Elongation after aging | 100% min. | ASTM D 638 | |
Electrical: | Dielectric voltage withstand | 2500V, 60sec no breakdown | UL224 |
Volume resistivity | 1010Ω·cm min. | ASTM D 876 | |
Chemical: | Corrosion | No corrosion | ASTM D 2671 |
| Flammability | Self-extinguishing within 60 seconds | UL224 |
Product sizes
·Inch size mm/inch
Size | Inside diameter | Wall thickness | Standard length (m/spool) | |
As supplied(min.) | After recovery(max.) | After recovery | ||
1/8 | 3.2(0.125) | 1.6(0.062) | 0.51±0.08(0.020±0.003) | 200 |
3/16 | 4.8(0.187) | 2.4(0.093) | 0.51±0.08(0.020±0.003) | 100 |
1/4 | 6.4(0.250) | 3.2(0.125) | 0.64±0.08(0.025±0.003) | 100 |
3/8 | 9.5(0.375) | 4.8(0.187) | 0.64±0.08(0.025±0.003) | 100 |
1/2 | 12.7(0.500) | 6.4(0.250) | 0.64±0.08(0.025±0.003) | 100 |
3/4 | 19.0(0.750) | 9.5(0.375) | 0.76±0.08(0.030±0.003) | 50 |
1 | 25.4(1.000) | 12.7(0.500) | 0.89±0.12(0.035±0.005) | 50 |
Ordering Information
Nonstandard: Brown (- BR), orange (-OR), violet (-VT), gray (-GY), yellow & green stripe (-GYS)
Special sizes are available upon request.
On spools. Cut pieces are available upon request.
Specify product type, size (mm or inch) and color.
Company Information: