Mester 13W UL Energy Star led retrofit kit 5 years warranty

LED Retrofit Kit Features & Advantages:

Dimmable to 10% with select dimmmers.

UL and Energy Star Qualified

Anti-Glared design with Baffle

High Output Bright LEDs

Instant on to full brightness

Suitable for damp locations.

USA 5" & 6" LED Retrofit Kit Parameters:

Model NO.	DW13DR46 LED Retrofit Kit
Power	13W
Lumen	800lm
Voltage	AC120V
C.C.T.	2700-6500K
C.R.I.	80Ra or 90Ra
Beam angle	90 degree
Power factor	0.9
Size	D190*L88mm
Base type	E26 Adapter
Lifetime L70	50,000hr

Dimmable 5" & 6" LED Retrofit Kit Capability:

Dimmer compatibility list indicates those dimmers that have been tested and operate properly under nomal conditions.

5" & 6" LED Retrofit Kit Anti-glar:

5" & 6" LED Retrofit Kit Installation: 

 Step 1. Make sure the power is turned off at the source to the recessed housing inside which you are installing the products. Once power has been turned 0, remove existing the trim and bulb.

Step 2. Unscrew the lamp socket mounting bracket inside the recessed housing (g.2a). Unclip the lamp socket from the bracket, and discard the bracket (g.2b)

Step 3. Screw Edison base adaptor into the socket (g.3)

Step 4. Plug the female connector of retrot kit to the male connector of the socket adaptor (g.4)

Step 5. Squeeze the springs of the retrot kit and insert them inside the housing retaining bracket (g.5).Careful tuck allt the wire inside the can and gently push retrot kit up ush to ceiling surface.

HOUSING COMPATIBILITY

Compatible with most standard 5" and 6" insulated and non-insulated housings that have spring retaining brackets inside(g.1a).Compatibility of housing may be determined by measurement of the housing as detailed in (g.1b) 

5" & 6" LED Retrofit Kit Transportation:

 

 

Our LED Retrofit Kit services:

....