Sewage water waste water disinfection UV sterilizer 

This device taking a special high-strength non-ozone UV germicidal lamp and it's inner wall using a special treatment of the micro carbon austenitic stainless steel. 

Outside of the tube with a special polishing process, the water flowing through the tube is irradiated with a sufficient amount of 253.7nm ultraviolet line , so It has good bactericidal effect, but also effectively reduce the impact of ultra-pure water.

Structure of Sewage water uv sterilier 

Specification  of Sewage water uv sterilier 

• 304 or 316 polished stainless steel reactor
• Quartz sleeve to ensure optimum working temperature
• Sterilization comprehensive, rapid and efficient, highest sterilization rate of up to 99.9%
• High output, physical sterilization, no attachment role, no secondary pollution
• All stainless steel case, the European craft, silky inner walls, no dead ends.
• Equipment clean, electro-polished, for high purify the environment.
• Electrical configuration of the device is suitable for world markets.
• Special exterior design, easier to use

UV Disinfection application

1.Food processing industry, including juices, milk, drinks, beer, practical oil and canned food.
2.Hospitals, various laboratory and high levels of pathogenic body water cleaning .
3.Electronic industry.
4.Households building, residential, office buildings, hotels, restaurants, water factories.

5.Purification and disinfection of shellfish, fish cleaning and disinfection process
6.Military camp, field water supply system
7.Urban wastewater disinfection.
8.Swimming pool, other recreational water cleaning or disinfection
9.Thermal power, nuclear power plant industrial, central air conditioning system cooling water.
10.Biological, chemical and pharmaceutical, cosmetics for the production of cooling water.
11.Sea water, fresh water breeding, aquaculture water

UV DOSE

The units generate a UV dosage of at least 30,000microwatt-seconds per square centimeter (μW-s/cm2), even at the end-of lamp life(EOL), which is more than sufficient to destroy most waterborne microorganisms, such as bacteria, yeasts, algae etc….

As a general guideline, the following are some typical UV transmission rates (UVT)

Our Factory