Product Details

High efficiency coal fired power plant

Parameter :

coal fired power plant

Model	CG1Q1.0-1	CG1Q1.5-1	CG1Q2.0-1	CG1Q2.4-1	CG1Q2.6-1	CG1Q3.0-1	CG1Q3.2-1
I.D. Of chamber (mm)	1000	1500	2000	2400	2600	3000	3200
Heat perception area of water jacket (m3)	0.785	1.77	3.14	4.52	5.31	7.07	8.04
Applicable coal	Non-caking or weak-caking bituminous coal.Coal property should coinlident with the requirement of GB9143.
Ash layer (mm)	100-300	100-300	100-300	100-300	100-300	100-300	100-300
Coal size (mm)	13-25,25-50,50-100
Coal consumption (kg/h)	150-240	350-550	600-900	900-1400	1000-1500	1500-2200	1700-2600
Gas output(Nm3/h)	450-700	980-1600	1750-2800	2500-4000	3000-4800	4000-6500	4600-7400
Net heathing value (KJ/m3)	5020-6060	5020-6060	5020-6060	5020-6060	5020-6060	5020-6060	5020-6060
Gas pressure(KPa)	<0.98	<0.98	<0.98	<1.5	<1.5	<1.5	<1.5
Gas temperature(°C)	400-550	400-550	400-550	400-550	400-550	400-550	400-550
Max blast pressure (KPa)	2.0	2.45	3.5	3.5	4.0	6.0	6.0
Saturated temperature(°C)	50-65	50-65	50-65	50-65	50-65	50-65	50-65
Feeding coal mode	Manual,Automatic
Coal feeding system	Bell charging,mechanical charging,bell charging,hydraulic charging
Discharging ash mode	Automatic discharging ash

Abstract :

Single stage gasifier is a continues coal gas generating system.The air and steam produced by the water

jacket is blown through the gasifier bottom to the furnace.The 0.294 Mpa steam and saturated air are gasifying

agent.Lump coal after crushing,screening to size 25to50 mm or 50to100 mm,is added to the gasifier by

coaling system.The coal gas is generated and then goes into the gravity dust collector and cyclone

dust collector and then transport to users.

Application :

It uses air and vapor as the gasifying agents to produce mixed gas. It is suitable for gasifying

coking coal, hard coke, etc. and is widely used in machinery, metallurgy, chemistry, glass,

building materials, food, textile and light industries.

Welcome to you visit our factory!