Specifications

1)Automatic Back washing 
2)Compact structure, small occupation and low consumption 
3)High efficiency 
 

Disc filter Description

A disc filter is a type of water filter used primarily in irrigation, similar to a water strainer, except that the filter cartridge is made of a number of discs stacked on top of each other like a pile of poker chips. The water passes through the small grooves in between and the impurities are trapped behind. The higher or lower filtration quality, defined this as the higher or lower quantity and size of particles that the filtering element is able to retain, depend on the geometry and size of the channels, the length of these and the number of generated intersection points. This machine can backflushed in such a way that the discs are able to separate and spin during the cleaning cycle.

Disc water filter Component

• Capacity: High flow (881-3522 GPM)
• Uniquely efficient; precise particle separation
• Innovative filter design captures and stores large amounts of solids
• Low energy and water consumption
• Long-term operation with barely any maintenance
• Operation is easy and requires no filter media replacement
• Continuous flow during backwash
• Corrosion-free
  TECHNICAL DATA
  
  

  DATA	3 UNITS	4 UNITS	5 UNITS
  Maximum pressure:	145 psi	145 psi	145 psi
  Minimum pressure for backwash:	38 psi	38 psi	38 psi
  Flow rate (40-140 mesh, 100-400µ):	1,188 gpm	1,672 gpm	2,200 gpm
  Flow rate (55µ):	660 gpm	880 gpm	1,100 gpm
  Flow rate (20µ):	—	—	550 gpm
  Filtration surface area:	2,040 in2	2,370 in2	3,410 in2
  Filtration volume:	1,208 in3	1,610 in3	2,010 in3
  Filter length:	57-3/32"	76-25/32"	96-15/32"
  Filter height:	53-22/32"	59-27/32"	59-27/32"
  Filter width:	31-18/32"	36-11/32"	36-11/32"
  Weight (Polyester coated):	640 lbs.	814 lbs.	1,065 lbs.
  Weight (Stainless steel):	605 lbs.	781 lbs.	1,023 lbs.
  Weight (Bermad valves):	737 lbs.	957 lbs.	1,243 lbs.

• It is a fully automatic filtration system, which means that the filtration process starts once the flow of source water to the system begins, and provides a continuous supply of clean water.
• The number of 4" Spin Klin filters in the battery will generally range between three to 10, according to the needs of the application (i.e. the flow rate, the quality of source water, and the grade of filtration). Each filter unit contains five elements of filtration, composed of a stack of grooved discs. The five filtration elements work together simultaneously.
• The inlet on each filter has a 3-way valve with two positions. See the Spin Klin page for more details about filtration and the backwash process.

           a. Filtration position — where the inlet of the filter is open, this allows the flow of water from the inlet manifold into the   filter and through the element of filtration to the outlet manifold and to the user system. 

          b.  Backflush position — where the inlet to the filter is closed, and the drain port is open. This allows clean water from the outlet manifold to flow in the opposite direction into the filter, clean the discs of the filter element, and flush the solid impurities from the filter to the drainage through the drain manifold. This technology is recommended for good and average qualities of source water, with 40 to 120 mesh grades of filtration. The filtration process begins and a continuous supply of clean water goes on, once the flow of source water to the system starts, and until it ends. When the filters are loaded (with solid impurities) the difference of pressure between the inlet and the outlet of the filter battery rises. A differential pressure gauge detects the critical difference of pressure that was programmed on it, and transmits a signal to the control unit, which then starts and runs a backwash process of the filters in the battery, one after the other. Only one filter at a time is cleaned while the other filters in the battery continue to supply clean water to the downstream, and for the backwash process.

Disc Water filter Features

• Filtration of solids and impurities is reliable, accurate and efficient
• Innovative filter design, which can store larger amounts of solids, reduces need for backwashing
• Short flushing duration minimizes flush water consumption
• Regulated flush water volume for efficient backwash and water consumption
• Operation is easy and automated, and requires no special tools
• Automatic cleansing of filter element during each backwashing eliminates the need for labor-intensive, expensive, element replacement
• Uninterrupted water supply during backwashing

Disc Water filter  Application

1. Pure water, bottled water, fine filtration, clarification of a variety of industrial    

2. Purify variety of chemical solution.
3. Water treatment and medicine, liquor and beverage clarification and enrichment.

4. Beer, grape wine, yellow wine, wine and beverage industry