Specifications

Dropping Point Tester
- It is used to determine dropping point of lubricating grease and solid hydrocarbon
- Air bath

Lubricating Grease Dropping Point Tester Model: SLH -270A

Summary
The instrument is designed and made as per industrial standard SH/T0115 Standard Test Method for Dropping Point of Lubricating Grease and Solid Hydrocarbon. The instrument is air bath, and it is suitable to determine dropping point of lubricating grease and solid hydrocarbon which dropping points are over than 100 °C. Place lubricating grease or solid hydrocarbon into grease cup. Heat grease cup until a drop of sample or 25 mm oil line flows out of the cup under the stipulated temperature. Then the temperature is dropping point.

I. Main technical features
1. The design can totally meet standard SH/T 0115.
2. Desktop structure. Double sample working style. It can do parallel test for two samples at a time.
3. The power of two lines heating can be adjusted continuously.

II. Main technical specifications
1. Power supply: AC 220 V±10%, 50 Hz
2. Heating power of electric furnace: 250 W×2
3. Heat control: Silicon controlling knob. Stepless regulation
4. Ambient temperature: ≤35 °C
5. Relative humidity: ≤85%
6. Maximum power consumption: 700 W
7. Dropping point thermometer: (0~150)°C,division value 1°C;
(100~250)°C,division value 1°C.
8. Test tube: Inner diameter Φ42mm, length 200mm. Wall thickness (1∼1.5)mm. Good transparence and no bubbles
9. Dimension: 310mm×220mm×410mm

 

Lubricating Grease Dropping Point Tester ( air bath) / Dopping Point Tester of Lubricating Grease and  Hydrocarbon ( air bath) / Dropping Point Instrument / Dropping Point Test Apparatus /   Petroleum Products Tester / Petroleum Products Instrument / Petroleum Products Test Apparatus /   Oil Analysis Equipment / Oil Tester / Oil Instrument / Oil Test Apparatus