Name: Wet Dental Model Trimmer Abrasive Disc Wheel Gypsum Arch JT19 Lab Device
Brand: SEGAwe
Availability: InStock

Product Details

Company Information

As a pioneer of Beauty Machine industry, SEGAwe is one of the largest suppliers and manufacturers involving beauty & healthy field. SEGAwe specializes in the development, design, production and management of beauty and healthy machines to all over the world. We have quickly won good reputation among both domestic and overseas customers with outstanding quality products at reasonable prices. Our company cooperates with professional factories in China. Meanwhile,SEGAwe is devoted to issuing unique and creative new machine that our patent have been approved since Lowen was established. Supported by the top level R&D center and the experts group. We also supply excellent after-sales service.

In order to suit the modern development of beauty industry, we are keeping improving the quality of our products, developing more and better products to satisfy all our customers. Segawe realizes inspiring idea and contributes to our modern life.

Product Description

Wet Dental Model Trimmer Abrasive Disc Wheel Gypsum Arch JT19 Lab Device

This powerful trimmer comes with low noise

Features:

1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve

2. Connect the waste-disposal tube to the unit

3. Connect the power cord, and switch on the power switch (O=off, l=on)

4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)

5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)

Attention:

If there is some abnormal noise when working on

Possible reason:
1.Axon is loosing

2.Disc is not plain enough

How to solve it:
1.Dissemble the disc with spanner ,make the snap Ring tightly

2.change the disc

The machine does not work when power on

Possible reason:
1.fuse get burnt

2.motor get burnt

3.switch get wrong

How to solve it:
1.change the fuse which inside the socket:

2.change the motor